DJI Mini 3 Compact case with remote and batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hassle free travel and storage friendly case for your DJI Mini drone.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep everything together and tidy home&backpack.
This remix includes all suggestions mentioned in the original model and it's easier to fit in a backpack:
Compact design
Snap in lock system
Fit remote with sticks and lanyard mount
Fits a generic battery charger with up to three batteries
The remote sticks should stay undisturbed while stored.
Cut one corner of the bottom piece in the 3mf file due to my A1 Mini having a hard time with its built-in skipped step detection. Feel free to revert the change if your printer doesn't have this issue.
Also added a higher infill section due to the remote base warping and failing the print.
If your charger differs in height, measure it then move the groove. Account for eventual rubber feet at its base that will act as small springs to help keep it in place.
Next steps for remixers
Move the battery compartment and there is some space left for a small drawer: more than enough to store the DJI Mini screwdriver and spare propellers.
The battery handle could be edited into a foldable case handle (dual function). The battery handle can already lift the case securely, so a sturdier one with a larger groove could easily do.
Instead of the handle, the lanyard could be used for transport (and storage). As it currently doesn't have a place in the case.
I am most likely done iterating this model as lots of time and filament went into it.