GEEETECH Filament Runout Sensor Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to allow me to enclose my Geeetech A20M. Its little runout sensors do not have a way to contain a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I designed this to allow me to enclose my Geeetech A20M. Its little runout sensors do not have a way to contain a guiding teflon tube that would allow loading of filament from outside/above the cabinet. This piece is designed to replace the little plastic cap on the stock sensor with a piece that allows a coupler. The coupler needs to be heated and screwed in to make it seated. I am including the Fusion file as well if you need to tweak it slightly.
Print Settings
Printer:
Geeetech A20M
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
10
Filament:
AmazonBasics PLA
Gray Post-Printing =============
On my printer it printed a little ugly and needed a little cleanup in terms of removing elephants foot around the holes and such.
Category: 3D Printer Parts