P
PrintablesMINILab3D
Fan duct geeetech a20m
Fan duct geeetech a20m
- Pobrania
- 345
- Polubienia
- 19
- Ocena
- 4,5
Wyniki wyszukiwania: a20m
34 modeli
P
Printablesredangel1984
Dual Z Adjustable Bracket for Geeetech A10 / A10M / A20 / A20M + Short Firmware Instructions
Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the…
- Pobrania
- 282
- Polubienia
- 26
- Ocena
- 4,67
P
Printablesredangel1984
"Der Skorpion" - Fan Duct for Geeetech A10M and A20M dual colour printers
Update 29.12.2018: Version 1.1 of Skorpion where the duct mount was thickened and the duct outlet was shortened to be a little more far away from the heater block Because the cooling on my A10M and A20M was not quite convincing, I…
- Pobrania
- 134
- Polubienia
- 9
- Ocena
- 0
P
Printablesfirepower
E3D V6 Mount Geeetech A10 A10M A20 A20M
E3D V6 Mount A10 A10M A20 A20M Designed to mount on the existing A10 X carriage, use two M5x30mm SS Hex head screws for more support / key instead of original dome head screws for top roller bearings, for quick removal and replacement…
- Pobrania
- 107
- Polubienia
- 14
- Ocena
- 0
P
Printables3DMakerNoob
Geeetech A20M Purge Bucket
Here's my first iteration of the purge bucket for the Geeetech A20M. Installing this along with the tool changing script (tested on Simplify3D Only), will allow the purge to happen within the bucket instead of the printer printing a purge…
- Pobrania
- 104
- Polubienia
- 21
- Ocena
- 0
P
Printables3DPrintBeginner
Geeetech A20M custom build plate
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
- Pobrania
- 86
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTom
Unique Color Generator for Geeetech A20M Cura Plugin
Hi guys, you maybe know my issue... You brought a 3D Printer with a dual extruder and after printing numerous cats, geckos, and traffic cones you're trying to find out what you should do now with this machine. I tried to figure out what…
- Pobrania
- 84
- Polubienia
- 5
- Ocena
- 0
P
Printablesredangel1984
E3D Hemera Mount for Geeetech A10 / A10M / A20 / A20M ... A## and A##M printers
Mounting instructions can be found in the PDF in the file section: <------ If you like this mount please use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. you can also use the link:…
- Pobrania
- 76
- Polubienia
- 5
- Ocena
- 0
P
Printablesjyc35
Geeetech A20m mount 2in1 bigtreetech cyclops hotend
11/26/2020 Update: V3!! (Green) Fixed part that was touching M5 screws, Added mounting point for 40mm fan As i accidentally destroyed my Geeetech A20m hotend trying to unclogged it. So i'm designing a mount / backplate for the Bigtreetech…
- Pobrania
- 63
- Polubienia
- 12
- Ocena
- 5
P
PrintablesDas Faust
Geeetech A20/A20M GT2560 V4.0 to SKR 1.4 Turbo Adapter
Needed an adapter to install an SKR 1.4 Turbo with TMC2209 stepper drivers, after a few tries I finally came up with one that works. I used Jayo PLA Meta in Gray, 1.8 layer height. M3x5 Screws to mount the board, M3x5 with washers to…
- Pobrania
- 48
- Polubienia
- 1
- Ocena
- 0
P
Printablesfirepower
A10M A20M Part Fan Duct
After trying other A10M Parts Fan ducts, and they blow on nozzle i remixed to place it lower and add lip to force some air downwards. Also fillet mounting hole corner. Print Settings Printer: Geeetech A10M Rafts: No Resolution: 0.2mm…
- Pobrania
- 48
- Polubienia
- 2
- Ocena
- 0
P
Printablesfirepower
A10M A20M Parts Fan
After trying other A10/M Parts Fan ducts, they blow directly on nozzle. I copied the original A10M Fan duct and made it longer so it blow below the nozzle, also trimmed it and laid it flat by using 45 degree cuts. Print flat no supports…
- Pobrania
- 45
- Polubienia
- 3
- Ocena
- 0
P
Printables3DPrintBeginner
Geeetech A20M custom build plate
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
PrintablesIhgedasila
Geeetech A20M Cable Management
The Cable Organizer remain between two extruders to avoid any problem with the cable during the print. you will need the support and also two t-nuts and M3 screws. better to print with 50% infill. I put two different stl files whit the…
- Pobrania
- 40
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMake it Reality
Viktor Schauberger vortex cooling duct for Geeetech A10T, A20M 3D printers
Inspired by Viktor Schauberger, this intuitive design attempts to create a parts-cooling vortex tornado, by directing air from two directions in an offset manner. Printed in crystal PLA, with supports. This PLA was transparent to…
- Pobrania
- 38
- Polubienia
- 4
- Ocena
- 0
P
PrintablesUsman Naeem
Geeetech A20m SKR2 mount
A simple mount to install SKR2 to the A20M Any BTT board with same foot print will also be fine ofcourse.
- Pobrania
- 37
- Polubienia
- 3
- Ocena
- 5
P
PrintablesKolbu 3D
A20M Fanduct for V6.
Easily printed, Works with PETG, better with ABS :)
- Pobrania
- 31
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTazor
A20M Extruder lever
Replacement lever for the original extruder of the Geeetech A10 and A20. Print in PETG for resistance.
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
Printablesfirepower
Purge Bucket for Geeetech A10M A10 A20M A20
Purge Bucket for Geeetech A10M A10 A20M A20 Use two M5 x 40mm Hex head screws for mounting. uses 1mm thick silicon sheet Print Settings Printer: Geeetech A10M Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: GENERIC PLA / PETG…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
Printableslolo710maker3D
Silicone A20M et A10M
La chaussette s’adapte très bien sur le bloc de chauffe de notre A20M et A10M buse longue,mais elle pourra être recoupé niveau de la buse pour s’adapté sur des buses courte. La chaussette a une épaisseur sur le contours de 1.8 mm, la…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCyryllo
Greetech A20M dual extruder mount plate
Mounting plate for two extruders. The plate is dedicated to the Greetech A20M printer, but can also be used in other printers. Best cut from Aluminum or steel. Optional attached STL model. You need: 2x hammer nut 2x M5x10 PL: Płyta…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesHarm van Mierlo
"Der Forklifter 2.0" - Fan Duct for Geeetech A10M and A20M dual colour printers
(copied from thingiverse, but keep in mind the changes i made) Because the cooling on my A10M and A20M was not quite convincing, I designed this part with following concepts in my mind: More silent 40x10 or 40x20 Fan instead of the two…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFritz
Geeetech A20M purge bucket at new machines
The purge bucket by 3dMakernoob https://www.thingiverse.com/thing:3362680 (and it's remixes) ist good for older A20M. Newer machines have a "nose" at the printhead and can't drive to th most left position. You can cut the nose, but I…
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
Printablesfirepower
E3D V6 Purge Bucket for Geeetech A10M A10 A20M A20
Purge bucket for A10M, A10, A20M, A20 with E3D V6 Hotend Mount. https://www.thingiverse.com/thing:4240378 Use two M5 x 40mm Hex head screws for mounting. 3 versions with different sizes of silicon sheet can be used 1mm, 1.5mm, 2mm (1.5mm…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesUsman Naeem
Geeetech A20M BIQU H2 mount
This is a simple mount for BIQU H2 for Geeetech A20M 3D printer. It might work for other Geeetech 3D printers but I am not sure. Ofcourse you wont be able to mix colors if you choose this setup. Part cooling fan mount and bltouch mount…
- Pobrania
- 17
- Polubienia
- 4
- Ocena
- 0
P
Printablesclickbangdead
BTT SKR 1.4 and Pi Zero 2W mount for Geeetech A20M
This is a new motherboard mount for the Geeetech A20M to allow installation of the Big Tree Tech SKR 1.4 along with a Pi Zero 2W form factor device and MP1584 buck converter. Main features are: The microSD card of the Pi is accessible…
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGerald85
A20M E3DV6 ORIGINAL MOUNT BLTOUCH
mount for Geeetech A20M E3DV6 original bltouch original radial fan 50x50x15 screw for Fan : 2X 25mm m3 with m3 nuts and washer screw for mount : 2x15mm m3 on top 1x20mm m3 with m3 nuts and washer for right bottom (fix fan too) 1x15mm m3…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesD4rksid3D
Geeetech A20M X Carrier for BTT 2in1 Hotend BL Touch
Here is My Remix for GeetechA20m Baseplate for BTT2in1 Hotend i didnt like the Fanduct so i redesigned the Baseplate to use a Radial Fan for Part Coolin Hope u like the Design maybe leave a me a small tip. BL Touch Offset X37.12 Y2.96…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFishtown
Geeetech A20M Halter Hypercube Evolution
Das ist ein Halter für das Geeetech A20M Hotend. https://i.ebayimg.com/images/g/llYAAOSwjJdeU3nA/s-l1600.jpg This is an mount for the Geeetech A20M Hotend Category: 3D Printing
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesclickbangdead
3DTouch mount for der Skorpian (Geetech A20M)
This is a remixed touch probe mount for the der Skorpian fan duct (https://www.printables.com/model/18904-der-skorpion-fan-duct-for-geeetech-a10m-and-a20m-d) for the Geetech A20M to allow the use of a 3DTouch probe. The 3DTouch and…
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPlasticVisua3d
Custom bmg style extruder Printhead for ender3,geetechA20m, all 2020 profile X-axis
printed in abs at 90% for carriage, other parts can be printed in other material and with a lower infill, the part you need: 5 heat press 5 3mm screws 3 v-wheels (can be taken from previous printhead) 8mm inductive probe (bed leveling) 1…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablesclickbangdead
Geeetech A20M stabilizers for Belted Z (KevinAKASam)
This is a set of stabilizers for the Geeetech A20M for use during/after conversion to KevinAKASam's Belted Z mod. It is intended that for one of the stabilizers you use the 355MM leadscrew as part of the stabilizer, while the other…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printables
Geeetech A20M stabilizers for Belted Z (KevinAKASam)
This is a set of stabilizers for the Geeetech A20M for use during/after conversion to KevinAKASam's Belted Z mod. It is intended that for one of the stabilizers you use the 355MM leadscrew as part of the stabilizer, while the other…