"Der Forklifter 2.0" - Fan Duct for Geeetech A10M and A20M dual colour printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified version of Der Forklifter fan duct for the Geeetech A10M and A20M on thingiverse.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
(copied from thingiverse, but keep in mind the changes i made)
Because the cooling on my A10M and A20M was not quite convincing, I designed this part with following concepts in my mind:
More silent 40x10 or 40x20 Fan instead of the two 30mm fans for the hotend
Better cooling with a radial 5015 Fan
To see better whats printing
CustomisableThe BLTouch has following X and Y offsets:
X= -43 mm
Y= -26mm
Check also the spacers so far you need some
https://www.thingiverse.com/thing:3556404
What you'll need:
Extra parts:
1x Axial 40x10 or 40x20 (recommended) for the hotend
1x Radial 5015 for the Fan Duct / Part cooling fan
Printed Parts:
-Base
-Front
-PCF
-BLT Mount (optional)
1x recommended Hotend PCB Mount: https://www.thingiverse.com/thing:3195894
Mounting bits:
4xM2x12 for carriage
M3 Screws
- 4x 25mm
- 2x 10mm
- 3x 15mm(for BLT)
- 2x - 4x 15 /25m for the Fan
- 2x M3 nuts for the Partcoolingfan
I highly recommend a silicon sock on the hotend, otherwise, you will get min Temp Errors over 30% of the Partcoolingfan