"Der Forklifter 2.0" - Fan Duct for Geeetech A10M and A20M dual colour printers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modified version of Der Forklifter fan duct for the Geeetech A10M and A20M on thingiverse.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
(copied from thingiverse, but keep in mind the changes i made)
Because the cooling on my A10M and A20M was not quite convincing, I designed this part with following concepts in my mind:
More silent 40x10 or 40x20 Fan instead of the two 30mm fans for the hotend
Better cooling with a radial 5015 Fan
To see better whats printing
CustomisableThe BLTouch has following X and Y offsets:
X= -43 mm
Y= -26mm
Check also the spacers so far you need some
https://www.thingiverse.com/thing:3556404
What you'll need:
Extra parts:
1x Axial 40x10 or 40x20 (recommended) for the hotend
1x Radial 5015 for the Fan Duct / Part cooling fan
Printed Parts:
-Base
-Front
-PCF
-BLT Mount (optional)
1x recommended Hotend PCB Mount: https://www.thingiverse.com/thing:3195894
Mounting bits:
4xM2x12 for carriage
M3 Screws
- 4x 25mm
- 2x 10mm
- 3x 15mm(for BLT)
- 2x - 4x 15 /25m for the Fan
- 2x M3 nuts for the Partcoolingfan
I highly recommend a silicon sock on the hotend, otherwise, you will get min Temp Errors over 30% of the Partcoolingfan