1 / 1
Geeetech A20/A20M GT2560 V4.0 to SKR 1.4 Turbo Adapter — zdjęcie 1

Geeetech A20/A20M GT2560 V4.0 to SKR 1.4 Turbo Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Couldn't find one already designed online so I did one myself, wanted to go beyond TMC2208 standalone in my A20M.

Ocena
0 / 5
Polubienia
1
Pobrania
48
Wydruki
0
Wyświetlenia
449
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Needed an adapter to install an SKR 1.4 Turbo with TMC2209 stepper drivers, after a few tries I finally came up with one that works.

I used Jayo PLA Meta in Gray, 1.8 layer height. M3x5 Screws to mount the board, M3x5 with washers to mount the adapter.

The reason for the space to the left of the board is to add extensions and surface mount them to the chassis. The orientation is so that that the stepper motor cables can reach their intended spots without having to replace/modify them.

Tagi