Liczymy pasujące modele…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
Does NOT work with the Scimitar RGB as it has different layout for the main buttons and screws. Unfortunately, without buying one I cannot make a model specifically for that one. It works with Scimitar RGB Elite, and should work with…
These are designed for larger model rockets (≥ 3-in body tube) to fit on a 1010 aluminum extrusion ("rail") with just enough wiggle room to prevent binding but will slide nicely and keep the pointy end going up. They have 6mm holes so a…
Originally the remix of the ingenious Car Vent Gravity Phone Holder by Abdel Darwish that in the version V3 I remodeled from the scratch, keeping the original idea and general outline. Main changes in V4 (2025-07-26) Changed parts : Arm…
All credit goes to theamzngq, and his models. I found that this stl had a pretty large gap between the base and battery post
A basic backplate and a magsafe backplate for the KV4P project (https://kv4p.com/). Use a magsafe sticker like https://www.amazon.com/gp/product/B09DFB9733 for the magsafe backplate.
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
Falcon2 Pro Collection This is a bracket to hold a Wyze V4 or V4 camera($20-30 off Amazon) in place to observe your cutter remotely. The Wyze software to view your camera is free. I wanted a way to keep an eye on my cutting while in other…
replacement cd holder for 95-05 gm vehicles. it's for people that don't use CDs and want to use the space for something else like put your favorite stuffed animal monkey or your tools for your secret talent of lock picking. this is public…
This is a cushion that you can print and glue to the inside of the Lid
Eco Turbo Fan - FLSUN V400 I designed a kit to mount the BIQU eco turbo fan kit on the FLSUN V400. I started from the fun duct by Robert_Klotz (https://www.printables.com/model/725525-flsun-v400-cpap-duct) modifying it and improving some…
I've included a picture of the fob that this model replaces. Example is printed PETG-CF on Creality K1 using 0.6mm nozzle 0.3mm layer height. Recommend printing PETG or ABS with 0.4mm nozzle, 0.2mm layer height. Print the two main parts…
For best results us supports and PETG or ABS. I did prototype it with PLA, and while is should work I liked the rigidity of PETG.
Minimalistic folding feet for laptop rear side elevation and better air flow - heavy duty version. It's easy to print and assemble. This version is focused around Cat Paw styling (PUNI) with features: let you laptop spread its paws with…
This was a shape I thought would work well to show more of the volume a printer is capable of, using less time and filament than a typical sculpture. Prints well in transparent PETG at a default 50mm base size, using less than 10g of…
Stand for a Razer Kraken V4 Pro Headset, including the OLED Control Hub and Wiring, including holes for M3 Brass inserts
Provides a place to add attachments to the Core of the Lowrider V4. Like a drag chain or vacuum tube mount.
Its quite easy to make, letters might need a bit of a sanding, cause its a snug fit, or scale them a little bit down, with touch of glue, they will hold ( i didnt glue mine, they fit perfectly) , Use wood screws and few big enough washers…
~1/3 scale Completely remastered this because I wasn't happy with V3. Contains a more accurate chopper and is made for a different motor. Made on Tinkercad: https://www.tinkercad.com/things/6L614OmHl5k-screamer-s-10-912-print-v4 PRINT ALL…
~1/4 scale Made on Tinkercad: https://www.tinkercad.com/things/jNr5mzAu4fu-cyclone-120-print-v1 PRINT ALL PARTS SEPARATE DO NOT PRINT THE FULL MODEL, IT IS THE FULL MODEL LIKE THE PICTURES AND CANNOT BE SEPARATED (updated model) The…
I created this simple console organizer for Gen 3 Toyota Rav 4 (2006-2012). It has 2 dividers that creates 3 compartments, ideal for organizing tissues, pens, flashlight, etc. Finger cutouts in the middle make it easier to grab objects.…
Beefed up a little bit, added a bit of length for machines that have a custom outlet and added a recess for screw head
There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…
.4 nozzle .2 layer height. Tested with PLA and PETG. I tested it against the original version that doesn't have a locking tab and this version stays closed from a 4" drop whereas the original version without any tab spills open. V4 is a…
Lens hood compatible with Leica Elmarit 28mm v3
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
the mount is modified to the VZ Bot Carthographer V4 its tested
Commercial Use and Attribution Notice © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the…
Commercial Use and Attribution Notice © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the…
Bumper for the glove box compartment of a Volvo V40. Designed to be printed in TPU. 🖨Recommended print settings: Print flat with supports under the peg; 3 walls; 20% infill.
Стационарный кѾрпус для Heltec V3-V4 c воможносью установки энкодера, клавишного переключателя, двух аккумуляторов 18650 либо один 21700. Клавишный переключатель: https://ali.click/hl1puq Рекомендации по печати: Высота слоя 0.2 Без…
Meshtastic Heltec V3 & V4 with 5000 OR 10,000 mAh Battery Holder – Junction Box Ready This enclosure setup is designed to house Heltec LoRa V3 or V4 Meshtastic nodes along with a 5000 mAh LiPo battery , creating a compact, durable, and…
Cartographer V3 Shield mod here Bambu Lab print profile Cartographer V4 Shield Cartographer has a capacitor and a thermistor on the bottom and because of that every little hit can make them fall out If the thermistor is gone its fine, the…
Enclosure for HELTEC LoRa 32 v4 This is a simple enclosure for the HELTEC LoRa 32 v4 with space for all development needs. There are many cases/models that are better if you want a portable and fully closed case. This enclosure should be…
This model's main inspiration was the Haven node by @DataSlayer_1802073 The main chassis consists of three parts that fit together with the parts wedged between them. Everything is held together with two M4 bolts. The antenna clips are…
Features a simple installation and plug & play design — only the original stock screw is required. For improved durability and long service life, the part is recommended to be printed from a rigid material.
I had a solar panel that would be a good use in this micro solar node. The area where I am located has 95% of sunny days so this panel is sufficient for this purpose. Two 18650 batteries can keep the node operational for 2-3 days with…
Falcon SRx2 v4 Receiver Board – 3D Reference Model (STL) This is a 3D mechanical reference model of the Falcon SRx2 v4 receiver board , intended for enclosure design, mounting layout, and fit verification . The model focuses on external…
A silencer for the UMAREX T4E HDX .68, version 3.0, printed in 3 pieces, designed to screw together but for some weird reason I can not slice the thread so then now it is glued together. It has been designed in Inventor 2025. I included…
A simple mount to center your gyro on the chassis of your RWD-converted Tamiya TT-02. Includes a wall to route cables along the inside of the clip. Notes: Mount to chassis as pictured using an extra Tamiya 3x10mm "MA2" screw Print on the…
Full build and parts list here: https://youtu.be/SGtsrj1iNdA?si=aU3m2Nj5qC_zZCgw Youtube channel: www.youtube.com/@comeonMacGyver Tips appreciated at paypal.me/ComeOnMacGyver
I wanted a chassis brace for my arrma granite V4 which is very different than previous models when it comes to adding any existing 3d printed part or older accessory. I found nobody makes a V4 brace so I made one myself. In the process I…
UPDATE: I am uploading a new V2 model to the project, which has a deeper SMA connector. V1 (SIMPLE): V2 (NEW): For Heltec V4 Uses only M3 DIN 912 screws (M3x20) and M3 nuts Links: Heltec v4: https://s.click.aliexpress.com/e/_c3QDa7V1…
I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…
This is a minimalist 3D printable enclosure designed specifically for the Heltec V4 (WiFi LoRa 32 V4) board. The design focuses on clean lines, compact form factor, and practical usability while keeping the device lightweight and easy to…
Here is the V4 version of my Tree of Life night light. This evolution features a more refined finish thanks to its Greek-inspired decorative border , giving the design a premium look. Symbolic and elegant design: The tree represents…
This is my 1kg spool inspired spiral fidget that i had been working on for this week. It has a very satysfiyng and smooth feel. You need to remove supports but it is very easy. PLEASE COMMENT AND GIVE A RATING BECAUSE IT HELPS A LOT.
This case is perfect for someone who just wants the stock Heltec V4 as with no extra batteries etc, but want it in a case. There's room for the GPS module. Easy and quick to print, no supports required. I assembled it using one m3x4…
This is a Remix of an original Model by Wiseone. For a detailed description please see the original Model. The only change to the original model is an added cutout to be compatible with the Makita 644808-8 spare part as contacts instead…
A minimalist 2D wall shadow that every gamer and shooter fan will love. 🎮🕹🔫 Minimalist 2D Wall Shadow Jet Decoration - Gaming & Shooter Room Decor. Looking for a clean, modern wall decoration that’s easy to print and perfect for a gaming…
This model's main inspiration was the Haven node by @DataSlayer_1802073 The main chassis consists of three parts that fit together with the parts wedged between them. Everything is held together with two M4 bolts. The antenna clips are…
This is an addition to the model created by @alko ( https://www.printables.com/model/1297216-corne-choccherry-v4-case) . This adds the inclined bottom for the Cherry-style board, since the original model only contained an inclined bottom…
1 Volume & 4 Switch equipped Wall Mount Control panel for DME7, MTX/MRX Series and MA/PA series. The front panel is not available separately.
Simple Heltec V4 case for mobile use, designed for parts I had on hand. Parts I used: Heltec V4 (and included wire pigtail) KCD11 Rocker Switch 902030 Lithium Battery heat shrink M3 heat-set insert M3x12 mm SHCS Soldered: When closing the…
A simple Heltec V4 companion case for use with Meshcore, Meshtastic or similar software. The case also provides space for use with a 18650 battery with or without BMS. If you like my model please send me a message on Meshcore @NL-RTD-R2
Wanderer Astro Flat Panel V4-EC 125mm Askar SQA55 mount. The two halves of the clamp attach using two sets of M6 Screws and hex nuts The flat panel has slots for M3 nuts and M3x12mm Screws and attaches with four sets of these; two on…
Needed a mount for WYZE Cam V4. this one fit the bill. my first remix. I hope you like it.
Cartographer V4 probe mount designed for the Sovol SV08. Print: 1x (Cartographer v4 Mount) 2x (3.25mm tall ID 3.2mm OD 6mm Spacer) (these spacers slide on the screws that came with your cartographer mount) Probe Offsets (add these to your…
This is a collection of cases for the Heltec WiFi LoRa 32 v3/v4 boards. It holds the board, a battery, and optionally an environmental sensor. The button (PRG) can be pressed and the reset button (RST) is accessible via a pinhole (use a…
I made this phone cradle to fit between the vents on a 2010 Toyota RAV4. The mount fits snuggly between the vents and clips in with two clips. The cradle is seperate and designed to be modular depending on your phone and case. I added a…
Summary These solid motor‑block bricks are designed to snap onto Duplo-elements, giving young builders the visual feel of engines and machines. Their one‑piece construction makes them safe, sturdy, and ideal for imaginative play without…
This is a base to hold the https://www.printables.com/model/1519908-heltec-lora-32-v4v3-slim-cases
This is my cup holder for my 1999 RAV4. It installs to the passenger side seat bolt. I have printed it using Bambu Labs PETG HF using 15% infill in two separate parts, then glued together with JB-WELD plastic bonder. Seems sturdy enough…
My old PC case lost a foot and wanted to sit crooked, so I modeled this foot to match the dimensions of the original.
For working hinges DO NOT place any supports above the hinge because they could interfere and stop the hinges from working
Buttons for heltec. except the reset one is recessed
Print the SMA non-gps back from the original model to go with this.
These USB C ports (easier to model as a rectangle): https://www.amazon.com/Teansic-10PCS-Female-Connector-Converter/dp/B0F3WS4TQS These JST 1.25 stubs: https://www.amazon.com/Letool%C2%AE30-1-25mm-Female-Connector-Cables/dp/B013JRWCBU…
This will enclose the board, a 3000mAh battery, a power switch, and a GNSS unit. It's not perfect, but I've spent too much time on it already. Requires some soldering for the switch and it's probably a good idea to use heat shrink over…
The space above the capsules is wide enough for spreading with a Standard ISO-Card.
3D-Printed Enclosure for Heltec V4 (GPS): Fix for GWS antenna and low profile single button
AVID CNC AVx0S Spindles - Simple to print dust shoe for the AVID smart spindles. The shoe comes in 3 pieces, the main shoe with pass through for air assist and nozzles, the dust collection box, and a dust skirt ring with guide holes to…
Summary If you are like me you have a few… or 10… of these empties laying around, and what better way to use them than to stuff a Meshtastic/Meshcore node inside. This is a snug, removable insert that fits inside a standard US market ZYN…
Modern Fluted Snack Bowl Don't forget the vase mode! This model is a stylish, fluted-edge bowl designed for serving snacks like nuts, candy, or small items. Its unique wavy geometry gives it a modern, elegant look while remaining…
I don't know how to CAD (which is why I remixed V1 vs V2)… Liked the style but was looking for a simple Heltec V4 case. I chopped the battery compartment to accompany one 18650 alone or an 18500 and a buzzer. This setup is more of a home…
Printed using ESun PLA+ Light Brown and Black Tank itself needs supports print it where the top is facing upwards Super glue is required as well Raw un-melted filament for the gun Made for keychain and desktop display Discord for updates:…
Based on vascosim's excellent remake of the muzi.works model. No supports need. Snip the support at the end of the internal antenna shaft if desired. Fits Heltec V4 and GPS, standard stubby antenna and 3000mAh Meshnology battery. Link to…
Print Settings: Same as Original. Better to print in ABS / ASA. Changes needed in the k2-improvements configs: Edit cartographer.cfg file: [cartographer] mcu: cartographer x_offset: 0 y_offset: -30 And: [bed_mesh] zero_reference_position:…
I couldn't find something like this for my Wyze Cam, so I decided to make one. I know it's not nice to look at, but it works for my needs. Hopefully someone else finds it useful.
The most recent set of boxes I received (4 of them) all have a bit narrower slot to place the “toe” into. I have remixed V3 into this V4 using the values supplied by Macco in his review of V3. I did a test print and they do slide in the…
Enjoy and let me know if you have questions or modification requests! Prints with no supports, I recommend printing with ASA, 4 walls and 20-30% infill. Make sure to acetone smooth for a water tight exterior! BOM Heltec V4 main board…
🔗 Visit the official BikePrint3D store for exclusive STL files, new releases and special offers: https://bikeprint3d.com Secure your cockpit during fork and headset maintenance. HeadMount V4 PRO holds the handlebar, stem and spacers…
I reccomend you use over a rolling tray as you usually put too much in. comes with 6 as i bought a 5 pack + the original one they give you. Pots fit loosely and the spreader tool's back acts as a packer, 2 packs per pod 180 degrees from…
Liquid Tank & Drip Tip für Flash-e-Vapor FEV v4.5s RTA Ein einfacher und leichter 3.5ml Tank für den FEV v4.5s RTA Das PETG muss wirklich trocken sein, ansonsten werden die Gewinde vom Tank nicht gut. Habe auch variable Z verwendet, damit…
Remixed from deniax’s gorgeous original Talisman Boardgame V4 Card Box Storage models : huge thanks for creating and sharing them. The original project was made for storing the official Talisman: Revised 4th Edition / Talisman V4 card…
Place this in the storage space to the left of the steering wheel to add another cup holder to your RAV4. Print upside-down with supports for the "plus" inside the cup--I used trees and it worked great.
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
A decorative PETG diffuser lampshade designed for a warm, soft-glow pendant light. The model features a pleated organic surface that helps break up direct light and create a more diffused visual effect. Designed as a single printable…
Antenna ring for Heltec v4 Expansion Kit Seam position: Random Sparse infill density: 100% Brim type: Outer brim only (recommanded) Brim width: 5 mm Brim object gap: 0.1 mm
Read more about the process here http://flashgamer.com/arduino/comments/making-a-good-cube Instructions This thing will print nicely on Makerbot's (only I've tested). The cube is really thin, just 1.25 mm but the lid stiffens the…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
Version v4 de la PetFill con carrete extraible. Esta pensada para hacer en una madera de 18x30 cm. No testeado todavía, pero lo puedes imprimir y compartir errores o sugerencias. Materiales: 4 cojinetes 608zz 2 tornillos M8 40mm 4…
Alternative fan shroud for MK3S+ direct replacement Feel free to share and comment so design can be improved. Newer version: MK3SP_alternative_fan_shroud_V4_1 Hardware needed: 3 x M3x10mm bolt 2 x M3x20mm bolt 2 x M3 hex nut or 1 x M3…
I replaced the Concorde lead acid battery in my Van's Aircraft RV4 with an EarthX lithium battery. As the lithium battery is smaller, I needed this spacer in the battery box. I printed with PETG at 15% fill. I didn't need supports for the…
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
![Stand for [ACOS] Heltec V3/V4 pager case](https://media.printables.com/media/prints/442cafef-24f0-43a1-99ea-27742e743268/images/12697236_fdc2aaf7-75a2-4936-b6b2-d8722321fc55_139600ca-1022-42d6-b079-8a62fd735dac/img_20260417_224854_162.jpg)
