1 / 4
DnD Dice Chest v4: Print-in-place Hinges and Threads, No Supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-place storage for a standard set of seven DnD dice (D20, D12, 2x D10, D8, D6, D4).
- Ocena
- 4,8 / 5
- Polubienia
- 204
- Pobrania
- 1070
- Wydruki
- 4
- Wyświetlenia
- 5193
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 4) (Komentarze: 7)Remiksy (0)Kolekcje (266)Powiązane
This is v4 of my print-in-place DnD dice storage box.
The design stores a standard set of seven dice and I've user tested the pictured green model for 2+ years filled with heavy metal dice, so even in PLA it is a robust and proven design.
Features a print-in-place living hinge and threaded nut for closure. Designed in Solidworks, tested in PLA on a Prusa Mk3 at 0.2 and 0.3 mm layers.
Print Instructions
- No supports needed
- The nut is already scaled up by 5%. I recommend trying to print the model as-is, but you may need to play with scaling to get a smooth mate with the threaded boss on the box.
- DnD dice vary in size-- you may need to scale the box size up or down to securely hold your dice without rattling (if so, don't forget about scaling the nut equally!).
- Extreme scaling down or up could result in the print binding or being overly loose. If anyone's dice are super small or large, let me know and I can upload a remix with different pocket sizes.