FLSUN V400 Top Screen Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to mount the v400's screen/speederpad at the top of the printer. Hooks into the vent holes underneath the logo.
- Ocena
- 4,667 / 5
- Polubienia
- 116
- Pobrania
- 1112
- Wydruki
- 12
- Wyświetlenia
- 4662
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bracket for mounting the v400's screen/speederpad at the top of the printer. Hooks into the vent holes underneath the logo, and pressure from the screen when inserted helps keep the mount rigid against the top of the printer. These should also be compatible with the popular lid risers that some people use.
While one bracket in the center is enough, two spaced apart is much more rigid!
I printed two with the following settings:
- Wall Line Count: 3
- Wall Line Width: 0.5
- Bottom Layers: 0
- Top Layers: 0
- Infill: 0%
This was more than rigid enough, and each bracket printed in only ~15 minutes.