Liczymy pasujące modele…
The new OpenRC Tractor is finally here!! It's been almost two years since I started working on this new MK3 TEA20 project. Now, after hundreds of hours of design, test, print, redesign… it’s finally here and all the hard work has paid…
This is a screw on oil funnel for the FA20 engine in the 2015+ Subaru WRX. It also works on a 1997 JDM ej20k so this very likely works on any Subaru engine out there. Just take the cap off and this fits into the oil filler neck. This…
Update 12-01-2025 Part 40a was not the final version and it didn't fit, now is corrected. Part 4-2a (standard fit) was not correct, now is corrected Added parts 4-2a and 4-2b with even higher tolerance (loose fit). Update 08-01-2025…
Various on-board holders for Bose A20 Control Modules. The modules fit in perfectly and are aligned with the top layer of the holder for optimal accessibility of the keys and volume knobs. Also fits for the Bluetooth Version. Fix in a…
Originally published here: Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case by tato_713 - Thingiverse This case is for the Samsung A20 phone (models started with a205), for the A20s (a207 models) look here . This case was tested on the…
Enhance your Lenovo M90q with this custom-designed 3D case tailored for the RTX A2000. This 3D model file is designed to optimize airflow, maintain compact size, and enhance the overall aesthetics of your setup. The model ensures…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
This is a simple platform trailer to carry your TEA20 tractor. For the hitch, you have two options depending on the hitch you installed on your TEA20. This trailer is not RC controlled, it is manual, but it works quite good.…
The tractor is awesome, but I decided to improve some parts. They are provided as STEP files (better quality than STL)
Brass-nut holes' size is 4.7mm (diameter) x 6mm (depth). You can insert M3x4x5 or M3x6x5 brass nuts.
Bottom is flat. Case is tested. Best printed slowly in TPU.
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
This is a realistic working rear arm controlled hitch. It pairs with the OpenRC Tractor TEA20 platform trailer. List of parts and materials can be found in the project BOM spreadsheet .
Keeps those pesky control bricks off your lap and out of the way while you're flying! (CRJ series) Variations include the A20 and A30 series controllers and hooks to go over the side of the cubby, either on CA or FO side, (both work)…
An easy way to mount your Bose Radio in the cockpit.
a caddy for your Bose A20 com box. holds 2 spare AA batteries and fits on snuggly
The OpenRC MK3 Tractor is a great model. Just about the only thing I didn't like on it though are the rear tyres. To me, they didn't quite have the look of “real” tyres. I've printed them out of PLA. These are printed in two pieces that…
Transform your tiny/micro PC into a high-performance powerhouse with our RTX A2000 OCuP4 V2 Enclosure designed for OCuLink eGPU setups. This compact and efficient enclosure is perfect for gaming, professional work, and any GPU-intensive…
There are two options, the first is a copy that can be bought for example on Aliexpress, but for my top flow cooler it did not fit, one wall interfered, so in the second version it was removed, but the rigidity of the structure was not…
Simple little print. All the hardware is 3mm (if you've built the tractor no doubt you have enough hardware left over) The blade can be set to push or pull and also locked in at an angle left or right depending on the need. While it's not…
simple Fan Shroud for the NF-A20 with 170x170mm and 154x154mm hole spacing
The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…
Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the…
A housing to create a silent desk fan out of a Noctua NF-A20. Bill of Materials ~320 g of filament AF-A20 fan, “5V” or “5V PWM” variant (comes with a Molex-to-Molex extension and a Molex-to-USB adapter cable) 8 x M4x40 SHCS screws (for…
Model Name: 200mm (Noctua) and 120mm Fan Stand using rubber mounts – 25° Angle (Mini Build Plate Friendly) Summary: A compact fan stand designed for 200mm Noctua fans, angled at 25°, and sized to fit within the 170mm build volume of a…
I made a replacement part for the central locking of a w201 trunk. Orginal part number (A2017500092) I printed it using my X1 CC with PA6-CF (100% infill) laying flat on the long part. works perfect so far. you may have to scale it…
Bose A20 (TM) control box mount. Attach the dovetail mount with the curve pointed up either by drilling and tapping for flush-fit screws or by using your favorite double-sided adhesive. Then slide the mount itself onto the dovetail. If…
This is a Afterburner-mount for a Ender-3 style printer. The mount does not use the original metal bracket, but the excentric nut is necessary. I have it running on my Geeetech A10 and it does it's job quite well. Feel free to give some…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Taking inspiration from: https://www.printables.com/model/268401-noctua-desk-fan But re-modelled for the A20 (200mm Fan) You can either print with the fan arm “plugs”, or if you skip the first 2mm, you can skip those plugs and print…
Personally I wanted nothing else but a plow or cultivator at the rear of my TEA20. I decided to search the web and found a cultivator posted 6 years ago which needed a little attention. But would fit my TEA20 perfectly with a few…
An attachment angle for my car broke so I created a replacement in CAD. For the unlikely case that anyone is searching for a replacement of this part, I put it here. It's the part that connects the center console panel to the tunnel…
No support required, ideally should be printed with ABS. Was using 6 pc. M4x15 bolts, 4 pc. M4x18 bolts, 6 washers and two M4 nuts to attacht this to dual cpu motherboard.
Bose A20 Control and battery holder
mount with adjustment for Atomstack A20/S20/X20 model fill >= 50% for assembly with laser you need: mount x3 mount2 x1 m5 screw 12-15mm x4 m5 nut x4 5mm washer x8 (optional)
This is a design of a mounting plate for a 200 mm x 200 mm Noctua NF-A20 Fan. I used it to build a ventilated 3D-Printer cabinet. The mounting plate was printed on a Bambulab P1S with the 0.2 mm standard profile settings and a 0.4 mm…
Replacement feet for a 43" Insignia TV I acquired. The TV in question uses M4 screws.
the title basically depending on how tight you want it you can scale it down like 0.2mm on X and Y axes
Update 29.12.2018: Version 1.1 of Skorpion where the duct mount was thickened and the duct outlet was shortened to be a little more far away from the heater block Because the cooling on my A10M and A20M was not quite convincing, I…
Pila nemá bednu a není ji kam šikovně strčit. Navíc musí být ve vodorovné (víceméně) poloze, aby z ní netekl olej. Tak šla nakonec na zeď.
Used to properly install a rear main seal on Subaru FA20 engines (BRZ / FRS / 86 / WRX) ensures the seal is installed at the proper depth. I used this on my 2013 BRZ.
Easy printable. Print it without support. Tested 0.15mm, PLA
Print two. Screw them down with 4 screws.
The print on the picture is resized by 200% i recommend you resize it to 200% as well before printing. Please don't forget to post a make and like the design if you enjoyed it :) happy printing!
Originally published here: Samsung Galaxy A20s a207 case by tato_713 - Thingiverse This case is for the Samsung A20s phone (models started with a207), for the A20 (a205 models) look here . Thanks to Cesar Augusto Finger for testing this…
I made an adapter for my new chinese x79 motherbord and old AMD 754 cooler that I had. It will probably work for AM2/AM3/AM4, but I'm not sure. Category: Computer
Bottom is flat. Case is tested. Best printed slowly in TPU.
Remixed mount for the Noctua 200 mm fan (NF-A20) to enable me to places them on my window sill without tipping over. To assemble you either need: 2 - M4x40 2 - M4 nuts 2 - M4 washers (optional) or: 4 - Fan screws (not tested but should…
E3D V6 Mount A10 A10M A20 A20M Designed to mount on the existing A10 X carriage, use two M5x30mm SS Hex head screws for more support / key instead of original dome head screws for top roller bearings, for quick removal and replacement…
Here's my first iteration of the purge bucket for the Geeetech A20M. Installing this along with the tool changing script (tested on Simplify3D Only), will allow the purge to happen within the bucket instead of the printer printing a purge…
RTX A2000 fan shroud, it doesn't perform that good. I wanted to test how viable such a thing was in practice. The files are for whoever wants to do something with it. Beware! The holes are like +- 1/2mm right. The screw might go in at an…
In this remix I just edit for make support compatible with: https://www.amazon.it/gp/product/B085ZM19QC/ref=ppx\_yo\_dt\_b\_asin\_title\_o09\_s00 To use it I decreased the acceleration of the extruder to 400. The printer is stable at up…
Mercedes Part A 201-727-02-87 This a printable replacement part of the door panel clip for the vapor barrier behind the door panels of various Mercedes models such as the Mercedes W201 (190, 190E) as well as the W124 (E-Class) . Would…
TEA20 counter weights for the awesome model from @makitprojects_103007. One hole M3 needs to be done in order to add the M3 screw in front, the 2 back holes are already part of the chassis. If you like it please hit the LIKE button, it…
Better fan for the Geeetech A20(M) Parts needed: -5015 fan -2x M3x25 Print the duct with the large side facing the buildplate.
Noctua NF-A20 fan duct and table clamp mount I chose to go for table clamps on this one, bc the A20 fan is heavier than the 120 and 140mm fans. A table stand would be a lot bigger and I dont want to waste filament if I dont have to The…
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
Anker's GaN chargers are my favorit. As they are quite slim I thought it might be a good space-saver idea to make a wallmount. I put two standard countersunk holes on its middle but you can securely mount them using 3M's command tapes as…
Securely place your phone in your Mercedes A180, A200 W176 middle console. Compatible with iPhone & Android. Simple design, easy install No support needed
Hi guys, you maybe know my issue... You brought a 3D Printer with a dual extruder and after printing numerous cats, geckos, and traffic cones you're trying to find out what you should do now with this machine. I tried to figure out what…
After some research I decided to create my own 737 hanger for headphones. Specifically designed for Bose A20, but other models fit easy as well. The hanger is designed to be clamped onto a sun visor rail. Designed in a way to fit FO as…
The 40mm fan on my Geeetech A20T broke, and it is hard to find this 40mm fan in 24 volts. The 5015 50mm fan is far easier to get in 24 volts, costs far less, pushes more air, and is far more robust. This duct also reduced stringing by…
PETG - for strength and flexibility in the clip 100% infill - for strength in the clip Tree support for the clip + upper arc. -- A20 is secured with 2 countersunk screws (2,5x8mm), remember to remove small Allen set screws first, there’s…
Satsana modified for Geeetech A20 with the wall to mount the board
Mounting instructions can be found in the PDF in the file section: <------ If you like this mount please use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. you can also use the link:…
This is my recreated version of the original fan shroud of my Geeetech A20. I modeled it after the original fan shroud broke. It snap fits into the hole of the fan and can be additionally locked with the screw. I removed the curve on the…
I bought an older SuperMicro server motherboard off ebay and it came with a low-profile 1U heatsink, which depends on airflow from some very loud fans, directed through the fins by the close-fitting top of the server chassis. Since I put…
I made this replacement part before I loose the original one since I doubt I will be able to ever buy one… I made 2 versions. One that is the same as the original and one with a narrower cut for the blade. Don't know on which other models…
A small, stackable case for Intel LGA2011 (Intel Xeon E5 v1-v2) CPU's. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 20% Category: Computer
For Atomstack X20, A20, S20 Sealing the air-assist chamber good or bad idea? I was surprised by the amount of dirt (soot) I found in the chamber after a few cuts. The soot can land on the protective lens and cause distortion or more…
A nice little cap to go along with the funnel made by NotForEveryone. I keep the funnel in the car and it leaks a bit of oil after refilling my car so I thought this would be a nice addition.…
11/26/2020 Update: V3!! (Green) Fixed part that was touching M5 screws, Added mounting point for 40mm fan As i accidentally destroyed my Geeetech A20m hotend trying to unclogged it. So i'm designing a mount / backplate for the Bigtreetech…
Sub250 said that the Huma was only suitable for the DJI 03, however just two parts are required to fit a Walksnail Moonlight as well as some 30mm (M2) standoffs and two 10mm x M2 bolts.
Printed in petg with supports. Print vertical
Clip für den Sitz des W208 zur Befestigung der hinteren Verkleidung. Muss als Spiegelteil für die Gegenseite gedruckt werden.
Vacuum adapter for BLACK+DECKER KA2000-QS To FESTOOL hose.
Use together with MK3 TEA20 https://www.printables.com/model/318896-openrc-tractor-mk3-tea20 and platform trailer https://www.printables.com/model/484950-openrc-tractor-mk3-tea20-platform-trailer both models are from makitprojects…
I made it because I couldn't find any online and I want it for a project. It is based on the information given by the datasheet . I hope you find it useful.
The design is inspired by the Hover Air drone. It is designed to be assembled and glued. The files are optimized for perfect balance and work just as well as the original body, but without the camera or front light, which I removed for…
I am just creating sth. around the NF-A20 fan. If you have a project too here is the CAD file of the fan - you don't have to take all the measurements yourself :D Have fun!
Tired of loud, flimsy portable fans that barely move any air? This project transforms the industry-leading Noctua NF-A20 (200mm) fan into a versatile, silent, and fully portable cooling powerhouse. Whether you’re working on your laptop,…
Since I couldn't find anything on Ali when looking for a spare part, here is a replacement for the 12mm hex tire adapter (part number: 32746). I printed it in ABS, but it would probably also work in PETG or PLA. edit to your needs.
An adapter I made really quick to convert my AMD CPU cooler to fit one of those cheap Xeon motherboards. You mount the adapter pieces to the board using m4 6mm screws. Two important notes: 1. I haven't used this for high temp applications…
Needed an adapter to install an SKR 1.4 Turbo with TMC2209 stepper drivers, after a few tries I finally came up with one that works. I used Jayo PLA Meta in Gray, 1.8 layer height. M3x5 Screws to mount the board, M3x5 with washers to…
After trying other A10M Parts Fan ducts, and they blow on nozzle i remixed to place it lower and add lip to force some air downwards. Also fillet mounting hole corner. Print Settings Printer: Geeetech A10M Rafts: No Resolution: 0.2mm…
Bottom cover for the ICOM IC-A20 for use without a battery. Two versions provided: ica20-cap-supports.stl : version with hand-crafted supports ica20-cap-nosupp.stl : no built-in supports The cap slides and clicks without play. Use a 0.4…
After trying other A10/M Parts Fan ducts, they blow directly on nozzle. I copied the original A10M Fan duct and made it longer so it blow below the nozzle, also trimmed it and laid it flat by using 45 degree cuts. Print flat no supports…
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
My friends forgot to remove their mount from the rear windscreen and needed a new one... Rather than paying $15 + shipping I just knocked this out, partially from memory. I've provided two models, one that sorta follows the lines of the…
Just a simple stand for my DIY PC Case, which has a Noctua NF-A20 fitted underneath for airdflow.
I purchased a Noctua NF-A20 fan and it would not fit inside my computer case due to an internal interference. I decided to mount in on the outside of the case as long as I could make it look decent. I am pretty happy with the result. I…
I printed and used the funnel created by NotForEveryone, it worked well for my Toyota 86. Afterwards I capped the bottom with the model created by Sajmahal. It worked great but the top of the funnel was open where it could collect dust…
Der Original X-Belt Support für den Geeetech A30 hat bei meinem A20 leider nicht gepasst, der war mit 6mm Auflager zu hoch für mich, daher habe ich ihn um einen mm niedriger gemacht und jetzt passt er perfekt. I would be very happy about…
The Cable Organizer remain between two extruders to avoid any problem with the cable during the print. you will need the support and also two t-nuts and M3 screws. better to print with 50% infill. I put two different stl files whit the…
Installing the Z-axis adjustment accessory on the Atomstack *20 Pro models requires moving the Y-axis stop switch 20mm or the machine will fail to home, and even when moving the switch 20mm it will still fail if the laser head is in the…
I'm in the process of updating my Geeeteh A20, This is a quick cover for the X motor. It might also work for other similar desined printers. I printed in ABS 0.2mm layer 15% infill.
Inspired by Viktor Schauberger, this intuitive design attempts to create a parts-cooling vortex tornado, by directing air from two directions in an offset manner. Printed in crystal PLA, with supports. This PLA was transparent to…
A very easy and fast to print tripod adapter for a Noctua NF-A20 200mm silent pc fan. I use it to sleep when it's too hot and while not very powerful, it generates a slight breeze that covers the whole bed perfectly. They are not cheap…
