Atomstack Laser X20 A20 S20 Pro cable chain mount with screws and heatsets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because I didn't like the idea to just clip the mount on the device I made a new one.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 284
- Wydruki
- 0
- Wyświetlenia
- 1926
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The mounts are work in progress.
I used a 10x20 cable chain to fit the cables and the hose of the air assist:
https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Used these belt clamps (one especially on the X axis to support the mount as seen in the picture):
https://www.thingiverse.com/thing:5180252
You have to redo the cables bacause they will be too short as they are for every cable chain mount.
Rotate the X-motor to connect the cable sideways (see the pictures).
Material:
Y-Axis:
7x M3 heatsets (~4mm outside)
6x M3 screws
3x flathead M3 screws (for the chain)
2x M3 hammerhead nuts
X-Axis:
4x M5 buttonhead screws
3x M5 nuts
6x M3 heatsets
6x flathead M3 screws (for the chain)
Toolhead:
3x M3 heatsets
3x flathead M3 screws (for the chain)
4x M3 nuts
4x M3 screws
Printsettings:
Supports: No
Layerheight: 0.2
Material: PLA/ABS