Atomstack Laser X20 A20 S20 Pro cable chain mount with screws and heatsets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Because I didn't like the idea to just clip the mount on the device I made a new one.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 284
- Makes
- 0
- Views
- 1,926
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The mounts are work in progress.
I used a 10x20 cable chain to fit the cables and the hose of the air assist:
https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Used these belt clamps (one especially on the X axis to support the mount as seen in the picture):
https://www.thingiverse.com/thing:5180252
You have to redo the cables bacause they will be too short as they are for every cable chain mount.
Rotate the X-motor to connect the cable sideways (see the pictures).
Material:
Y-Axis:
7x M3 heatsets (~4mm outside)
6x M3 screws
3x flathead M3 screws (for the chain)
2x M3 hammerhead nuts
X-Axis:
4x M5 buttonhead screws
3x M5 nuts
6x M3 heatsets
6x flathead M3 screws (for the chain)
Toolhead:
3x M3 heatsets
3x flathead M3 screws (for the chain)
4x M3 nuts
4x M3 screws
Printsettings:
Supports: No
Layerheight: 0.2
Material: PLA/ABS