Noctua NF-A20 Fan Edge Molding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are edge molding pieces for use with the Noctua NF-A20 fan.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I purchased a Noctua NF-A20 fan and it would not fit inside my computer case due to an internal interference. I decided to mount in on the outside of the case as long as I could make it look decent. I am pretty happy with the result. I doubt anyone else will have a need for this but I thought I would share it just in case. The part with the name cable notch provides a relief for the fan wiring.
A small amount of support will be needed. I used grid style support with a rectilinear grid pattern with good results in PrusaSlicer (photo showing this is attached). Support for the wiring notch is not needed.
I came up with this idea after I noticed someone else's fan shroud. Here is a link to their model.
https://www.printables.com/model/363396-noctua-nf-a20-pwm-fan-shroud