Noctua NF-A20 Fan Edge Molding
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are edge molding pieces for use with the Noctua NF-A20 fan.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 43
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I purchased a Noctua NF-A20 fan and it would not fit inside my computer case due to an internal interference. I decided to mount in on the outside of the case as long as I could make it look decent. I am pretty happy with the result. I doubt anyone else will have a need for this but I thought I would share it just in case. The part with the name cable notch provides a relief for the fan wiring.
A small amount of support will be needed. I used grid style support with a rectilinear grid pattern with good results in PrusaSlicer (photo showing this is attached). Support for the wiring notch is not needed.
I came up with this idea after I noticed someone else's fan shroud. Here is a link to their model.
https://www.printables.com/model/363396-noctua-nf-a20-pwm-fan-shroud