Boeing 737 Headphones Hanger for Bose A20 and A30, compatible with other headphones as well
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom made hanger for Boeing 737 fits FO and CPT side due to its rotational head. Print in place in one piece.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
After some research I decided to create my own 737 hanger for headphones. Specifically designed for Bose A20, but other models fit easy as well. The hanger is designed to be clamped onto a sun visor rail. Designed in a way to fit FO as well as CPT side due to it's rotational head supported on ball joint. Hanger is designed as one piece to be print in place.
After the print is finished just lift it of the bed, twist the head to shear the small support joint inside (helps the inside ball to be print in place). Cut off the ball joint conical support and remove some brim if used.
I suggest to use 2-4 mm brim to enhance model stability during a print.
Works well for both PLA and PETG.
Happy Landings Guys!
