The Adorable Articulated Mini Gecko
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fully articulated mini gecko prints in place and loves to hold onto anything it can grab.
- Ocena
- 4,903 / 5
- Polubienia
- 959
- Pobrania
- 6874
- Wydruki
- 32
- Wyświetlenia
- 18 334
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Standard Digital File License
Join here to get access: https://www.patreon.com/kogi3d
Articulated Print-in-Place Mini Gecko
This fully articulated mini gecko prints in place and loves to hold onto anything it can grab. Cute, flexible, and weirdly satisfying to play with.
ZIP file includes 4 versions:
V1 – Single-color full gecko with eyes
V2 – Multicolor gecko with 3D printable eyes
V3 – Multicolor gecko prepared for 8mm glass eyes
V4 – Single-color gecko with separately printable eyes
Multicolor / MF Files Note:
MF files are prepared specifically for Bambu Lab printers. Multicolor versions are designed to work with the AMS system and may not function correctly on other setups.
Recommended Print Settings:
Printer Type: FDM
Layer Height: 0.15 mm
Infill: 10–15%
Walls/Perimeters: 2
Supports: ❌ Not required
Brim: Optional (only if you have adhesion issues)
Material: PLA recommended
Nozzle Temp: 200–210°C
Bed Temp: 50–60°C
All parts are optimized for support-free printing, so you can simply load them up and start printing without extra setup - just make sure your printer is dialed in for best results.
⚠ Scaling Notice:
This model is finely tuned for proper articulation at its original size. Scaling up or down may cause joints to fuse or become too loose, resulting in failed or limited movement.