UGREEN Maxidok 10-in-1 Thunderbolt 5 Dock Under-Table Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An under-table mount adapter for the UGREEN Maxidok 10-in1 TB5 dockingstation.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is an adapter model for the awesome Dell WD19 Thunderbolt Dock Mount by round_circle.
A total of 4 models are required to print.
Printing
Remove the rubber feet from the bottom of the Maxidock. The Base Part comes with it's own feet to keep the dock in place.
I used the following settings for printing:
Infill: 15% Honeycomb
Supports: None
Ironing: Top surfaces
Layer height: 0.2mm
Printing in PLA should be totally fine as the dockingstation has a pretty good heatsink and ventilation opening. Use PETG or ABS to be extra sure and for more stability.
Required hardware
4x M3x18 Screws for mounting the lid to the base
Also check the hardware requirements from the Dell WD19 Dock Mount.