Self Watering Flowerpot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Self-watering flower pot, printed in 3 parts with a label to display the plant’s name and details.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Self-watering flower pot, printed in 3 parts with a label to display the plant’s name and details.
The slicer settings stored in the 3MF file are not suitable for all three printed parts.
For the pot itself, I only used supports for the upper overhang of the label. For the watering insert, I only supported the overhang of the grid feet (circular support) and printed the frame without supports.
Due to my slicer settings, I had some difficulty removing the supports, but this can be fixed by adjusting the slicer settings. Unfortunately, one of the grids broke in the process, which I then glued back together.
Printed on my Creality Ender 3S1 Plus