MTG Deck Box with Mana Symbol Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cap-lid deck box for sleeved Commander-sized MTG decks. Lid has an embossed mana symbol (WUBRG)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
A cap-lid deck box sized for a 100-card sleeved Commander deck. Cards sit sideways inside, so the lid wraps the outside of the body (no flange eating into the card cavity). Half-moon thumb notches on the body and lid align into a D-shaped finger hole at the seam — just push a thumb in and lift the lid off.
The lid top has an embossed mana symbol. Pick one of the five colors (W / U / B / R / G) — each comes as a pair of STLs:
mana_lid_<c>.stl— the lid shell with a recessed symbol pocket.mana_lid_symbol_<c>.stl— the symbol itself, sized to drop flush into the pocket.
Print single-colour and paint-fill the recess, or print the lid and symbol as two filaments in Bambu Studio / AMS for a clean two-tone finish.
Print notes
Body: flat on the bed, open side up.
Lid: pre-flipped in the STL so the top slab lies on the bed and the skirt grows upward — zero overhangs, no supports.
Symbol inlay: flat on the bed.
PLA or PETG, 0.2 mm layer, 2-3 walls, 15% infill.
Resize for other deck sizes by editing deck_count at the top of the .scad source.