MTG Deck Box with Mana Symbol Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple cap-lid deck box for sleeved Commander-sized MTG decks. Lid has an embossed mana symbol (WUBRG)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
A cap-lid deck box sized for a 100-card sleeved Commander deck. Cards sit sideways inside, so the lid wraps the outside of the body (no flange eating into the card cavity). Half-moon thumb notches on the body and lid align into a D-shaped finger hole at the seam — just push a thumb in and lift the lid off.
The lid top has an embossed mana symbol. Pick one of the five colors (W / U / B / R / G) — each comes as a pair of STLs:
mana_lid_<c>.stl— the lid shell with a recessed symbol pocket.mana_lid_symbol_<c>.stl— the symbol itself, sized to drop flush into the pocket.
Print single-colour and paint-fill the recess, or print the lid and symbol as two filaments in Bambu Studio / AMS for a clean two-tone finish.
Print notes
Body: flat on the bed, open side up.
Lid: pre-flipped in the STL so the top slab lies on the bed and the skirt grows upward — zero overhangs, no supports.
Symbol inlay: flat on the bed.
PLA or PETG, 0.2 mm layer, 2-3 walls, 15% infill.
Resize for other deck sizes by editing deck_count at the top of the .scad source.