Polymaker Polydryer Box PTFE adapter / stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stops standard smaller PTFE tubes from sucking into your polydry box and causing feed issues
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One of my biggest gripes about the Polymaker dry boxes is how standard PTFE and bowden tubes get pulled inside the rubber ports on the box, especially since I use several with my MMU3, and the large tubes they ship with sit in my parts bin. Fits the standard and the XL boxes.
I drew up this quick adapter piece in CAD. Its got just enough friction where the tube goes in, and has a bit of a bulge near the tip to stay in the box when you change filament.
I made mine at 0.18 layer height from PETG. No supports needed. Quick print on the Core One+.