HSW DeWalt 12v Drill/Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a lighter, stronger drill/tool holder for the DeWalt 12v line. It likely fits many other tools as well.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was playing with a friends' 3D scanner and my first terrible scan was my DeWalt 12v Screwdriver. After I made my Honeycomb Storage Wall I held off printing one of the other drill mounts solely because I had a 3D scan and wanted to make use of it... weeks later here you go.
It prints well laid flat either on its' back or bottom-down but I would recommend bottom-down for strength. With 4 perimeter/top/bottom layers and 25% infill it is far stronger than it needs to be printed in Sunlu Matte Purple PLA and it fits all 3 of my 12v tools great with retention to help keep me from dropping them as I put them up or take them down.
Countersunk M3 screws recommended to attach it via standard Honeycomb Storage Wall inserts and 2 is plenty but it can accommodate up to 4.