1 / 10
Zonestar P802QR2 X Axis Extruder Mount with Tensioner — zdjęcie 1
1 / 10

Zonestar P802QR2 X Axis Extruder Mount with Tensioner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a revision of my Right Hand X Axis extruder mounts for the Zonestar P802QR2…

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
179
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a revision of my Right Hand X Axis extruder mounts for the Zonestar P802QR2 (https://www.thingiverse.com/thing:3065295) that includes a Tensioner assembly for the X Axis drive belt.

The Thing utilizes the existing bearing and bolt assembly for the belt drive but you will require additional 2 x M3 Nyloc nuts and 2 x 20 mm long M3 bolts ( I used 2 of the spare bolts supplied with the original kit).

I have included some 0.5mm runners to all sides of the tensioner block. These can be trimmed dependent on printer tolerance to provide a nice snug fit to components.

All parts can be printed without support but may require some cleaning up where there is bridging. I used a 30% infill with 4 perimeters to make the print resilient.

MAKE SURE THE TENSIONER BOLTS DO NOT FOWL\RESTRICT THE DRIVE PULLY\BELT PRIOR TO ASSEMBLY\USE.

UPDATE: 14\10\18 Uploaded new version of Tensioner Block which due to its orientation did not appear correctly in the slicer (although still prints OK).

Category: 3D Printer Parts

Tagi