Zonestar P802QR2 X Axis Extruder Mount with Tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a revision of my Right Hand X Axis extruder mounts for the Zonestar P802QR2…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a revision of my Right Hand X Axis extruder mounts for the Zonestar P802QR2 (https://www.thingiverse.com/thing:3065295) that includes a Tensioner assembly for the X Axis drive belt.
The Thing utilizes the existing bearing and bolt assembly for the belt drive but you will require additional 2 x M3 Nyloc nuts and 2 x 20 mm long M3 bolts ( I used 2 of the spare bolts supplied with the original kit).
I have included some 0.5mm runners to all sides of the tensioner block. These can be trimmed dependent on printer tolerance to provide a nice snug fit to components.
All parts can be printed without support but may require some cleaning up where there is bridging. I used a 30% infill with 4 perimeters to make the print resilient.
MAKE SURE THE TENSIONER BOLTS DO NOT FOWL\RESTRICT THE DRIVE PULLY\BELT PRIOR TO ASSEMBLY\USE.
UPDATE: 14\10\18 Uploaded new version of Tensioner Block which due to its orientation did not appear correctly in the slicer (although still prints OK).
Category: 3D Printer Parts