44 models
Zonestar P802QR2 X Axis Mounts In this remix I have: Manually repaired the STL files so that they are now printable (The file I downloaded appeared to have some mesh issues and would not print correctly. Optionally, I have modified both…
My Collection of mostly remixes\upgrades for the Zonestar P802QR2. I have uploaded a Obj and 3DS file with all the relevant 3D models included if anyone wants to improve them further . The things can be found at the folllowing links…
Voron Afterburner conversion for Zonestar Z9. Making use of 23mm length nema 17 pancake stepper included with the printer. Using same size m3 heat set inserts as regular Afterburner. Number of bolt lengths are different from the original…
I created this thing to make my heat-bed of the Zonestar P802QR2 more steady like the Original Prusa i3's by Josef Prusa. The printer comes with the standard spring spacers on those long M3 screws and adjustment wheels that you can use to…
I converted my Zonestar Z5M to a direct drive single color machine with an E3D Hemera. I printed the fan duct on my Elegoo Mars resin printer, but it could be printed with PETG on an FDM machine. Print instructions Category: 3D Printer…
This hotend redesign is to allow Zonestar Z9 owners the ability to change their hot ends from their proprietary hotend to more effective hot ends in my belief. This is a first release and I encourage other Zone Star owners to test and…
This is a remix of a Z-axis upper brace with bearing by nilocwng but for the Zonestar P802QR2. You will see need a pair of bearings. I got mine from the following site:…
This is a pen holder holds pens with ~10mm diameter and is installed instead of the proximity sensor on the right side of the extruder. This allows for fast switching between regular printing and pen holder mode. You can use it to create…
This is a dust cover for the Zonestar 3D multi color printers of the Z8M4 and Z9v5 series. It should work over all iterations of those models, and all printers who use the same panel (Zonestar 4.3 Inch panel). You can also use it to…
Zonestar Z9M4 fanduct it is for the single color orginal printhead
Zonestar P802QR2 60mm Fan Duct About the only thing I have not had problems with the Zonestar P802QR2 is layer cooling so this thing may be a little OTT. The thing was inspired by a comment from the9rtyt regarding using 2 fans for…
Zonestar P80QR2 Fan Duct. Inspired by msavazzi`s duct - https://www.thingiverse.com/thing:2860576 but designed from scratch in SU18. Please note this will not work with the bed levelling sensor. Product Features Internal fixings to allow…
2 sizes of filament guides for the Zonestar P802QR2. The brackets attached to existing M3 screw holes in the main chassis. The Left guide includes 3 hoops for attaching cable ties to aid cable management above the motherboard. Collection…
Not much to say here. the Zonestar Z8PM4 is famous for flinging its printing debris into its own fan. so i designed this little cover. it should work for all places where the screws are 70mm appart diagonally, 49,5mm vertically and…
This is a Motherboard enclosure for the Zonestar P802QR2. I am still having some extruder shifts with my current fan\enclosure so I decided to design a much more spatially generous motherboard enclosure to accept a 120mm diameter stock…
I designed this little dirt shield for the Zonestar Z8PM4 Pro (i have the MK2.5 variant, other variants mai work if they have the same PSU at the same place). The PSU fan is facing up, and the print bed will move over the fan - under…
This is a set of extruder mounts for positioning the Extruder Assembles on the Zonestar P802QR2 X Axis Carriage. The advantages of this are: 1.Reduces the Boden Tube length by a third and therefore reduces stringing (see uploaded image of…
This is a remix of dfmsguitar`s excellent Power Supply Cover for the Zonestar P802QR2. In this remix I have Included more ventilation. Tweaked size slightly to accommodate the smaller version PSU. Included 2 tab returns to the back of the…
This is a remix of nilocwng`s excellent Z-axis brace for Zonestar P802QA. I have increased the thickness of the base plate a little, extended the forward webs and threw in a few rads. This and the upper Z axis brace make a very big…
My Zonestar Z5MR2 came without a mount for the X endstop. The cable for the Z endstop didn't match the switch that was mounted to the frame. The Y endstop allowed the bed to home too far back, limiting the bed position that was useable.…
This is a revision of my Right Hand X Axis extruder mounts for the Zonestar P802QR2 ( https://www.thingiverse.com/thing:3065295 ) that includes a Tensioner assembly for the X Axis drive belt. The Thing utilizes the existing bearing and…
I made this limitswitch to avoid little grabbing fingers get to my limitswitches and damage them. No need for screws or whatever, just clip them on, you can even keep the cable plug in place.
Zonestar 4in1 Out - Mounting Plate, with release. Uses Ender3/CR-10s Plate. To work with the following 4in1out head by Zonestar https://www.aliexpress.com/item/1005003762229283.html
A low poly cover for your x axis motors on your Z9V5 printer from Zonestar. There are 2 versions, one as a whole and one in a split version so you can slide it on without having to remove the Nema stepper motor from the assembly.
Layer: 0,2mm; Infill:50% Laser power 0,5W Screws 2xM2
Hi, this is the parts for the p802n Category: 3D Printer Parts
Made in OpenSCAD, file provided if anyone wants to improve the design. Reference used can be found here: https://www.thingiverse.com/thing:4877000 The half captured nut is so that you can use the cabletie slot for cable tidying. Once…
DO NOT USE WHEN NOZZLES\HEATER BLOCKS ARE HOT! Description: Zonestar P802QR2 Nozzle Allignment Jig. The jig is an aid to aligning the two hot ends relative to each other. There may be some additional levelling required when levelling…
Zonestar P802QR2 Y Axis Belt Tensioner 1.The unit is made up of 3 parts, a main body, tensioner and facia plate\washer. 2.You will require 4 x M3 x 20 mm long bolts with nuts (the nuts and bolts provided with the original kit work fine)…
Here's a simple motherboard case for the zonestar motherboard that attach to the power supply. There's emplacement for 2 80mm fans You'll need threaded inserts and some screws It print in 2 parts This is a simple version feel free to…
Zonestar P802Q series is a 3d printer that is one of "clones" of Prusa i3 with stainless frame. The stainless bracket of z-axes of those printers' fixes only the stepper motors but the z linear shafts are in holes drilled on the brackets.…
Z Axis Anti-Rotation Packer\Wedge for the Zonestar P802QR2 Wow, that's a mouthful. Basically due to the design of the stepper motor mounting tab when tension is applied to the X axis drive belt the Z axis stepper motor rotates off the…
This is my version of a mount for converting the Zonestar Z5MR2 to use the E3D Cyclops hotend. Prints in 3 parts - no supports needed. I used #4x3/8" sheet metal screws for mounting the parts to each other, and re-used the stock hardware…
Multi-jaw by LoboCNC: https://www.printables.com/pl/model/296122-reconfigurable-multi-jaw-vise/comments/1326085 Layer: 0.2 mm, Infill: 60% Nuts and bolts: M3
ENGLISH description: Case for Zonestar Motherboard, which is used in my Reprusa printer project. The case is also using 40mm fan for active stepper-driver cooling. Fan mounting is with 4 m3 screws with bolts. Whole printed part is…
Remix of the Heatbed Cable Holder for the Anet A8. Print Settings Printer: P802M Rafts: No Supports: Yes Resolution: 0,15 Infill: 30% Category: 3D Printer Parts
Simple thing to provide cables hoops above the motherboard to help tidy the various cables running vertically up the frame. Category: 3D Printer Parts
Remix of the Light Bracket for the Prusa i3. Should fit on Zonestar P802 -M and other types like the Anet A8 I will develop an own case which holds two or more of this light modules. This might take some Time until i got the modules from…
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s d'impression et 20 mm/s pour les parois
This is a modified spool holder support for a ZoneStar D810 delta printer. It replaces the original support to change the angle of the spool from 30 degrees to 60 degrees, to reduce the friction between spool and holder. Many thanks to…
This is like a printable version of the original Zonestar Extruder to make it much lighter. The original Steel Extruder is much heavy. Weight of the extruder head affects ghosting and the X movement. I print it in B-PET (recycled bottle…
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: No Resolution: 0.2 Infill: 20% Gyroid Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s en vitesse d'impression et 20mm/s pour les parois
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: No Resolution: 0.2 Infill: 20% Gyroid Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s en vitesse d'impression et 20mm/s pour les parois
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s d'impression et 20 mm/s pour les parois
