1 / 5
Zonestar P802QR2 60mm Fan Duct — image 1
1 / 5

Zonestar P802QR2 60mm Fan Duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zonestar P802QR2 60mm Fan Duct About the only thing I have not had problems with the Zonestar P802QR2 is layer cooling…

Rating
0 / 5
Likes
1
Downloads
29
Makes
0
Views
246
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Zonestar P802QR2 60mm Fan Duct

About the only thing I have not had problems with the Zonestar P802QR2 is layer cooling so this thing may be a little OTT.

The thing was inspired by a comment from the9rtyt regarding using 2 fans for cooling. Due to the fact I already am overloading the Zonestar`s cheap PSU with 2 additional fans already I thought that using one larger fan to spread the required cooling airflow might be an alternative solution. I have therefore designed a cooling duct which houses a 60mm fan to widen the origin of flow around the extruder assembly cradle.

Print Settings:

This thing does not need to be especially strong but being so near to the hotends using ABS or PETG may be better. I printed the thing @ 0.2 resolution, 2 perimeters and a 20% infil. The thing will probably print without support but I used some custom supports under the mounting bosses for a cleaner thing (see uploaded image).

I must stress this is definately work in progress. I have printed the thing successfully but have not tested it yet. You may have to change the fan mounting holes dependant on which type of fixing you prefer to use.

Category: 3D Printer Parts

Tags