1 / 3
Core One L roof rack HSW lock nut — zdjęcie 1
1 / 3

Core One L roof rack HSW lock nut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

HSW insert attachment to lock HSW in place on Core One L roof rack.

Ocena
0 / 5
Polubienia
7
Pobrania
12
Wydruki
0
Wyświetlenia
215
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

HSW insert / attachment to help lock a HSW to the Core One L roof rack. Insert expands with an M3 screw to ensure a good, non-permanent, grip.

Printing

  • Material: PC recommended for structural strength and heat resistance. ASA, PETG should be fine as well.

  • Nozzle: 0.4mm

  • Layer height: 0.2mm structural

  • Infill: 15% gyroid or whatever

  • Perimeters: 3

  • Solid layers: 5 top, 4 bottom

  • Brim: not needed

  • Supports: not needed

Bill of materials

  • Printed parts: COL-roof-rack--accessory--HSW-attachment-insert-locker.stl contains a single piece, copy as needed.

  • Non-printed parts: 1x M3x16mm socket screws per piece. Shorter M3 might be enough depending on the tolerances of the parts.

Assembly

  • Insert the lock nut into HSW with the attachment.

  • Place HSW on the roof rack, lining up the insert and, well... insert it into the roof rack.

  • Drive in the M3 until the legs of the nut have expanded to keep the HSW in place securely.

When all is done, I'd love to see you roof rack. Consider leaving a make and sharing your roof rack adventures. A like is appreciated if you got some use out of this model.

OpenSCAD

The following libraries are required:

Changelog

  • 2026-04-17: initial version

Tagi