Core One L roof rack HSW lock nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HSW insert attachment to lock HSW in place on Core One L roof rack.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 12
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HSW insert / attachment to help lock a HSW to the Core One L roof rack. Insert expands with an M3 screw to ensure a good, non-permanent, grip.
Printing
Material: PC recommended for structural strength and heat resistance. ASA, PETG should be fine as well.
Nozzle: 0.4mm
Layer height: 0.2mm structural
Infill: 15% gyroid or whatever
Perimeters: 3
Solid layers: 5 top, 4 bottom
Brim: not needed
Supports: not needed
Bill of materials
Printed parts:
COL-roof-rack--accessory--HSW-attachment-insert-locker.stlcontains a single piece, copy as needed.Non-printed parts: 1x M3x16mm socket screws per piece. Shorter M3 might be enough depending on the tolerances of the parts.
Assembly
Insert the lock nut into HSW with the attachment.
Place HSW on the roof rack, lining up the insert and, well... insert it into the roof rack.
Drive in the M3 until the legs of the nut have expanded to keep the HSW in place securely.
When all is done, I'd love to see you roof rack. Consider leaving a make and sharing your roof rack adventures. A like is appreciated if you got some use out of this model.
OpenSCAD
The following libraries are required:
Changelog
2026-04-17: initial version