Replacement stand for hand operated air pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The metal base/foot of my old air pump broke away. I printed a new stand for it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
The thin metal base/foot of my (very old) hand operated air pump broke away. I needed something to stabilize the body of the pump while I pumped it. I made this model in FreeCAD.
It's nothing fancy. But the strength is in the fillet and it's important to use a Modifier in your slicer to force a lot of walls around the periphery of the cylinder. (I put cutouts in the base as a way to force the slicer to print walls in the bottom. (Thanks, Slant3d.)
I made this one out of PLA. If it breaks, I'll try PLA+ or PCTG next. 0.4 mm nozzle. 0.20 mm layer height. Update: PLA print broke at a seam line. I printed another on the 45 degree angle in PCTG.