Replacement stand for hand operated air pump
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The metal base/foot of my old air pump broke away. I printed a new stand for it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
The thin metal base/foot of my (very old) hand operated air pump broke away. I needed something to stabilize the body of the pump while I pumped it. I made this model in FreeCAD.
It's nothing fancy. But the strength is in the fillet and it's important to use a Modifier in your slicer to force a lot of walls around the periphery of the cylinder. (I put cutouts in the base as a way to force the slicer to print walls in the bottom. (Thanks, Slant3d.)
I made this one out of PLA. If it breaks, I'll try PLA+ or PCTG next. 0.4 mm nozzle. 0.20 mm layer height. Update: PLA print broke at a seam line. I printed another on the 45 degree angle in PCTG.