nuprol LiPo battery puller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed something to help pull the battery out of the stock, didn't really want to yank on the wires.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Needed something to help pull the battery out of the stock, didn't really want to yank on the wires.
Yes I could've used a bit of ribbon, but didn't have any but I do have a £400 printer next to me 👍
This is designed for the Nuprol 1200mAh Amazon Link
2.5 has a slightly stronger battery clamp thing at the top
I used a 0.25 nozzle for a stronger part but you should be able to get away with a 0.4 if you reduce lines to 0.32 and print slowly at 0.18 layer heights
Print Settings: Takes 13 mins~ to print
nozzle:0.25
line width:0.22
max infill / walls
0.14 layer height