nuprol LiPo battery puller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed something to help pull the battery out of the stock, didn't really want to yank on the wires.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Needed something to help pull the battery out of the stock, didn't really want to yank on the wires.
Yes I could've used a bit of ribbon, but didn't have any but I do have a £400 printer next to me 👍
This is designed for the Nuprol 1200mAh Amazon Link
2.5 has a slightly stronger battery clamp thing at the top
I used a 0.25 nozzle for a stronger part but you should be able to get away with a 0.4 if you reduce lines to 0.32 and print slowly at 0.18 layer heights
Print Settings: Takes 13 mins~ to print
nozzle:0.25
line width:0.22
max infill / walls
0.14 layer height