Rancilio Silvia 3_Way Outlet Spout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spout extension for your Rancilio Silvia 3-Way valve outlet
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This spout helps the Silvia 3-way valve water discharge into the stainless-steel drip tray and not into the base of the Silvia where it will promote corrosion long term. To further mitigate corrosion, I've put some 2mm thick EVA foam strips under the stainless drip tray to isolate it from the painted carbon steel base frame.
I suggest using PETG or another somewhat temperature resistant filament. It will see hot water and steam when the 3-way valve opens at the end of the brew or even more so when you are backflush cleaning the grouphead with a blind basket several times in a row.
Recommend printing with a brim and 100% infill.
You'll find other good 3-way out outlet spouts on Printables but this is one was designed to be complimentary to my Bookoo Themis Ultra drip tray: