Couch Crafter - Armrest Table Designer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny, Easy to use Model, to create your very own armrest tablet. No openSCAD knowledge needed! Customizer only works.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
TLDR;
move 17 m17
bow diameter 12, angle 170 b12,170
move 17 m17
tag position t0
tray 4 wide k4
move 20 m20
back to tag position t0
tray wide 9 k9
move 20 m20
back to tag position t0
tray wide 14 k14
move 20 m20
That's how it looks in the customizer:
m17 b12,170 m17 t0 k4 m20 t0 k9 m20 t0 k14 m20
List of command set
M <len> move by len
B <diameter, angle> bow to the right by diameter and given angle, 180⁰ if not given
K <len> make a right tray with len len
T <number> first use tag the actual position, further use jump to that position
With this subset of commands you can already build any shape for any sofa.
Grab the source code and feel free to improve, enhance and reuse.
How to print
0.2 mm layer height (50% of nozzle wide)
0.6 mm extrusion wide (150% of nozzle wide)
2 or 3 walls (the more the stronger)
10% rectilinear infill
The model can be printed without infill.5 bottom and top layers
filament: PLA / PETG / TPU / anything
I really like this made by layers look
Default value 1cm can be changed in the customizer for bigger or smaller layers. The script can handle float but the customizer accepts only integer, so switch to mm (or grab the source code). You can use mm, cm, in for every value.