2U TFX PSU shelf for 10 inch rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2U shelf to mount 2 TFX power supplies in a 10 inch rack cabinet
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
2U shelf to mount 2 TFX power supplies in a 10 inch rack cabinet. It features side spaces to shove the unusued cables (useful if you don't have full modular units).
The provided .3mf file contains multiple models. The one named "Corpo1" is the design itself, the ones named named "mesh" and "mesh1" can be set as modifiers (with no top/bottom layers) in the slicer to get the perforation pattern in the front as shown in the photos.
Do not print in PLA. The heat and the weight WILL eventually deform it.
Requires a 10"+ build plate (254mm). A Prusa i3 or an Ender 3 is not big enough.
I printed it in PETG with the front plate laying on the bed and supports just for the screw holes.