1 / 3
Universal Trofast Rail For Harbor Freight Parts Boxes — zdjęcie 1
1 / 3

Universal Trofast Rail For Harbor Freight Parts Boxes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rail system for the Harbor Freight STOREHOUSE boxes in IKIA Trofast shelves

Ocena
5 / 5
Polubienia
10
Pobrania
57
Wydruki
1
Wyświetlenia
476
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Universal rail for the Harbor Freight STOREHOUSE medium and larger part boxes in the IKEA Trofast line of shelving units.

One rail model for both sides, and supports removal from the front and back of the shelf.

For medium boxes: space 25x40mm from the rail below
For large boxes: space 25x90mm from the rail below
The universal spacer, 40x90mm works for both boxes - Thanks David!

I found that I needed to space the first rail +3mm at the bottom of the Trofast shelf to keep it from dragging.

Printed in PTEG using with 15% infill and a 13mm cylinder modifier setting the infill to 50% at the screw holes.

Each rail is install with two #8 x 5/8" self-drilling hex washer.

Note:  This has only been tested with the Trofast shelves that have factory plastic rails.  There are several Trofast shelves that have a dado cuts into the shelf instead of a protruding rail. 

Onshape Document

Tagi