Universal Trofast Rail For Harbor Freight Parts Boxes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rail system for the Harbor Freight STOREHOUSE boxes in IKIA Trofast shelves
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 58
- Makes
- 1
- Views
- 482
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal rail for the Harbor Freight STOREHOUSE medium and larger part boxes in the IKEA Trofast line of shelving units.
One rail model for both sides, and supports removal from the front and back of the shelf.
For medium boxes: space 25x40mm from the rail below
For large boxes: space 25x90mm from the rail below
The universal spacer, 40x90mm works for both boxes - Thanks David!
I found that I needed to space the first rail +3mm at the bottom of the Trofast shelf to keep it from dragging.
Printed in PTEG using with 15% infill and a 13mm cylinder modifier setting the infill to 50% at the screw holes.
Each rail is install with two #8 x 5/8" self-drilling hex washer.
Note: This has only been tested with the Trofast shelves that have factory plastic rails. There are several Trofast shelves that have a dado cuts into the shelf instead of a protruding rail.