Bumpstop Ducati 1st gen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3d printed splitdesign bump stop for a 1st gen ducati monster
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a 3d printed bumpstop, so it can be installed without taking the entire shock apart for the budget riders out there :).
I don't say its safe for everyone and every use, but i simulated and tested it with 80kg rider and it seems to work very well.
It should be tied together with a zip tie and has notches to locate the parts to each other.
I simulated it as well best I could, and displacment and stress seem to work very fine for TPU 95A, with a progressive infill in the following order:
0-7mm: 80%
7-15mm: 40%
15-25mm: 15%