1 / 2
Bumpstop Ducati 1st gen
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3d printed splitdesign bump stop for a 1st gen ducati monster
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a 3d printed bumpstop, so it can be installed without taking the entire shock apart for the budget riders out there :).
I don't say its safe for everyone and every use, but i simulated and tested it with 80kg rider and it seems to work very well.
It should be tied together with a zip tie and has notches to locate the parts to each other.
I simulated it as well best I could, and displacment and stress seem to work very fine for TPU 95A, with a progressive infill in the following order:
0-7mm: 80%
7-15mm: 40%
15-25mm: 15%