Potato planter rotary table RAU Kombi System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turntable for the Rau Kombi System. Used to position the potatoes at the correct spacing
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Turntable for the Rau Kombi System. Used to position the potatoes at the correct spacing
If the print bed is large enough, you can print the potato_planter_full.
Otherwise, you can print Parts 1–4 and then glue them together.
The potato_planter_stabilisator provides additional stability and is glued on.
The flaps are taken from the original part and either glued in place or snapped into position
I printed it in PETG. The gear showed no signs of wear after about 2 hours of operation.
The base is original; some side panels have also been reinforced with 3D-printed parts.