Potato planter rotary table RAU Kombi System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turntable for the Rau Kombi System. Used to position the potatoes at the correct spacing
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Turntable for the Rau Kombi System. Used to position the potatoes at the correct spacing
If the print bed is large enough, you can print the potato_planter_full.
Otherwise, you can print Parts 1–4 and then glue them together.
The potato_planter_stabilisator provides additional stability and is glued on.
The flaps are taken from the original part and either glued in place or snapped into position
I printed it in PETG. The gear showed no signs of wear after about 2 hours of operation.
The base is original; some side panels have also been reinforced with 3D-printed parts.