1 / 23
RC4WD Gelande II Chassis Parts + D90 & Cruiser Body Parts — zdjęcie 1
1 / 23

RC4WD Gelande II Chassis Parts + D90 & Cruiser Body Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some bits and bops for both RC4WD Gelande 2 crawlers. Read the description.

Ocena
0 / 5
Polubienia
17
Pobrania
90
Wydruki
0
Wyświetlenia
420
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

General Description

  • Most parts marked L and R for left and right. LR parts fit or must fit both sides. However, some parts need to be mirrored in the slicer.

  • Almost all holes are designed for M3 screws. Sometimes nuts are needed, but sometimes you can screw them directly into the plastic (don't tighten them too much).

  • I printed everything in PLA+ with 25% infill and 3 wall lines.

  • Fender and batteryplate/skid are usually a single unit and are screwed together.

  • I've uploaded photos for all the parts, showing how they are installed.

d90_chassis_parts

Developed for the standard Gelande 2 version with links and R3 gearbox.

  • all_in_one / screwed to inner fenders / battery and D90 body mount simultaneously

  • inner_fender / screwed to all_in_one / integrated shock absorber mounts -> designed to lower the vehicle while still utilizing 90mm shock absorbers / the rear fenders require cuts in the body -> i have included a bed_cover in the d90_body_parts for this purpose

  • inner_fender_front_brace / stiffens the front shock absorber towers and gives the engine compartment a great look

  • akku_rear_high & flat / replaces the rear supports and gives a cleaner look / the flat one could touch the axle during very strong compression

  • akku_rear_flat_connect / combines the flat with all_in_one

  • slider / rockslider that are connected to the all_in_one

d90_body_parts

  • bed_cover / it allows the use of the inner_fender_rear, enabling large shock absorbers while maintaining a low vehicle height / requires massive cuts in the bodywork -> is attached to the bodywork with adhesive or M2.0 M2.5 self-tapping screws

  • bed_connect / connects the new bed to the car body (see pictures)

  • akku_front / space to fit the battery under the hood / screw or glue it to the interior part

  • hood_1 & 2 / my hood hinges broke off -> these parts serve as a sturdy replacement / hold up wonderfully (see photos)

  • mirror & mirror_drilling_template/ a print-in-place wing mirror as a replacement for my broken mirrors / use the drilling template and M2.0 self-tapping screws to attach them

cruiser_chassis_parts

Something special. The whole concept is based on an SCX10 LCG transmission in the middle and the RC4WD (Z-S1752) leaf kit. I implemented it using a Chinese knockoff chassis and axles (making it quite cheap; you get it on Amazon, AliExpress, etc).

  • skid_scx10_all_in_one / the basis of the entire concept / it offers space for LCG gearboxes with SCX10 bolt pattern (dluxfab clones, etc) / i used the Injora gearbox / with an outrunner motor or Fusion Elite facing rearward, no cuts to the bodywork are necessary (larger motors or other orientations require small cuts to the interior)

  • inner_fender / are screwed together with all_in_one

  • inner_fender_front_backplate / bolted to fenders and shock towers, making everything very stable

  • akku_front / the central gearbox leaves plenty of space at the front for batteries, winches, etc. / body_parts also includes parts to make the hood openable

  • akku_front_winch_cover / if u not using a servo winch to close the hole

  • bumper_rear / alternative rear bumper without lights -> alternative taillight in the body_parts / space for Amazon-China-AliExpress 13x13mm shackle and 15x15mm trailer hitch

  • bodymount / simple body mounts for the link version with R3 gearbox

cruiser_body_parts

  • grill_with_logo / alternative grill with large logo (requires two-color printing)

  • bed_hole_with_logo / the RC4WD body shell comes standard with a strange box on the rear cargo bed -> this part replaces that part

  • door_card & window_crank / alternative door panels with logo and crank

  • cage / a roll cage that adds a bit more detail to the cruiser when driving without a roof

  • hood_magnet / anyone who dares to detach the hood can use these parts to close it again very reliably / requires 15x3 neodymium magnets / hood_magnet_front is screwed onto the grill / the rear is glued to the interior (see photos)

  • rear_light / alternative version of the taillight -> fits perfectly with my rear bumper (in the chassis_parts) / screwed to the rear using M2.0 self-tapping screws / original RC4WD glasses fit inside (glue them in)

  • roof_magnet_mount / for those who can't decide "with or without a roof"; read this for more details / all parts are glued to roof or body / have holes for 6x2 magnets (must be glued in) / the roof holds extremely securely / unfortunately, RC4WD cast the windows as a single piece, rear windows and front windows must be separated

  • mirror_base / a bracket for the original side mirrors / original cant rotated and broke easily off / original holes fit / requires M2.5 self-tapping screws