RC4WD Gelande II Chassis Parts + D90 & Cruiser Body Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some bits and bops for both RC4WD Gelande 2 crawlers. Read the description.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 95
- Makes
- 0
- Views
- 445
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
General Description
Most parts marked L and R for left and right. LR parts fit or must fit both sides. However, some parts need to be mirrored in the slicer.
Almost all holes are designed for M3 screws. Sometimes nuts are needed, but sometimes you can screw them directly into the plastic (don't tighten them too much).
I printed everything in PLA+ with 25% infill and 3 wall lines.
Fender and batteryplate/skid are usually a single unit and are screwed together.
I've uploaded photos for all the parts, showing how they are installed.
d90_chassis_parts
Developed for the standard Gelande 2 version with links and R3 gearbox.
all_in_one / screwed to inner fenders / battery and D90 body mount simultaneously
inner_fender / screwed to all_in_one / integrated shock absorber mounts -> designed to lower the vehicle while still utilizing 90mm shock absorbers / the rear fenders require cuts in the body -> i have included a bed_cover in the d90_body_parts for this purpose
inner_fender_front_brace / stiffens the front shock absorber towers and gives the engine compartment a great look
akku_rear_high & flat / replaces the rear supports and gives a cleaner look / the flat one could touch the axle during very strong compression
akku_rear_flat_connect / combines the flat with all_in_one
slider / rockslider that are connected to the all_in_one
d90_body_parts
bed_cover / it allows the use of the inner_fender_rear, enabling large shock absorbers while maintaining a low vehicle height / requires massive cuts in the bodywork -> is attached to the bodywork with adhesive or M2.0 M2.5 self-tapping screws
bed_connect / connects the new bed to the car body (see pictures)
akku_front / space to fit the battery under the hood / screw or glue it to the interior part
hood_1 & 2 / my hood hinges broke off -> these parts serve as a sturdy replacement / hold up wonderfully (see photos)
mirror & mirror_drilling_template/ a print-in-place wing mirror as a replacement for my broken mirrors / use the drilling template and M2.0 self-tapping screws to attach them
cruiser_chassis_parts
Something special. The whole concept is based on an SCX10 LCG transmission in the middle and the RC4WD (Z-S1752) leaf kit. I implemented it using a Chinese knockoff chassis and axles (making it quite cheap; you get it on Amazon, AliExpress, etc).
skid_scx10_all_in_one / the basis of the entire concept / it offers space for LCG gearboxes with SCX10 bolt pattern (dluxfab clones, etc) / i used the Injora gearbox / with an outrunner motor or Fusion Elite facing rearward, no cuts to the bodywork are necessary (larger motors or other orientations require small cuts to the interior)
inner_fender / are screwed together with all_in_one
inner_fender_front_backplate / bolted to fenders and shock towers, making everything very stable
akku_front / the central gearbox leaves plenty of space at the front for batteries, winches, etc. / body_parts also includes parts to make the hood openable
akku_front_winch_cover / if u not using a servo winch to close the hole
bumper_rear / alternative rear bumper without lights -> alternative taillight in the body_parts / space for Amazon-China-AliExpress 13x13mm shackle and 15x15mm trailer hitch
bodymount / simple body mounts for the link version with R3 gearbox
cruiser_body_parts
grill_with_logo / alternative grill with large logo (requires two-color printing)
bed_hole_with_logo / the RC4WD body shell comes standard with a strange box on the rear cargo bed -> this part replaces that part
door_card & window_crank / alternative door panels with logo and crank
cage / a roll cage that adds a bit more detail to the cruiser when driving without a roof
hood_magnet / anyone who dares to detach the hood can use these parts to close it again very reliably / requires 15x3 neodymium magnets / hood_magnet_front is screwed onto the grill / the rear is glued to the interior (see photos)
rear_light / alternative version of the taillight -> fits perfectly with my rear bumper (in the chassis_parts) / screwed to the rear using M2.0 self-tapping screws / original RC4WD glasses fit inside (glue them in)
roof_magnet_mount / for those who can't decide "with or without a roof"; read this for more details / all parts are glued to roof or body / have holes for 6x2 magnets (must be glued in) / the roof holds extremely securely / unfortunately, RC4WD cast the windows as a single piece, rear windows and front windows must be separated
mirror_base / a bracket for the original side mirrors / original cant rotated and broke easily off / original holes fit / requires M2.5 self-tapping screws