1 / 2
Qube 500 Under Desk Mount - Reinforced Bolt-Holes +Infill Redux — zdjęcie 1
1 / 2

Qube 500 Under Desk Mount - Reinforced Bolt-Holes +Infill Redux

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rebuilt in the same footprint aside from the case-side hooks, which i completely redesigned as two seperate parts.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

It's an uglier under-desk mounting system for the Cooler Master Qube 500 pc case, but after it's installed, toolless mounting/unmounting is quick and easy compared with the other designs available here.   It didn't get a lot of love, but i'm the autistic guy who rebuilds his computer three times per week who he was targeting with this design i suppose.

With all due respect meant to the original designer.  And everyone i guess.  I don't know how to make you smile, but here are some models that you may not appreciate.  I changed the case-mounted hook design pretty drastically, but the others are just optimized for filament cost and mush stronger.  Goodbye.

Dont forget you can optionally print 4 case-mount hooks for all four corners instead of using the handle attachment and corresponding longer desk-mounted hook if you want the case to be mounted a bit closer to the desk.

Tagi