Aygo 107 108 C1 reverse camera holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
reverse camera holder that fits the citybug, just use the mount that followed with the camera and screw it in.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Reverse camera /backup camera holder that fits the citybug, just use the mount that followed with the camera and screw it in. Prints fine without supports. Printed in abs but pla is fine if you dont mind printing it again when it breaks, easy to change anyway.
To install: open the trunk (window) slide it over with the holes to the outside of the car and screw it in.
PS changed the design a little bit after taking the picture (made it a bit better), leave a comment if you like it or if you have some problems.