Bayonet Tube — Ø50 × 60 mm with Quarter-Turn Locking Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cylindrical tube container with two IDENTICAL bayonet caps. Drop a cap on either end, push, twist 35°, locked.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A simple cylindrical container with a clever lock: two identical bayonet caps that seat on either end of the open-both-ends tube. Drop the cap on, push, twist ~35°, locked.
No metal hardware. No supports. Print one tube and two caps.
Default dimensions: Ø50 × 60 mm (tube), 2 mm wall. Everything is parameterised at the top of tube.scad — edit tube_od and tube_h to resize. The bayonet slot / pin geometry scales automatically with the tube OD.
How the lock works. Each end of the tube has 2 L-shaped slots (vertical entry + horizontal lock arc, 180° apart). Each cap has 2 inward wedge-shaped pins. The two ends use opposite arc directions so a single hand motion — always twist CCW from your viewing side — locks both ends the same way.
Printing. Tube stands on either end, no brim needed. Cap prints TOP-DOWN (top disc on the bed, skirt rising up); the pins are ramped so their print-bottom face is a 37° slope, supportless.
