Bayonet Tube — Ø50 × 60 mm with Quarter-Turn Locking Caps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cylindrical tube container with two IDENTICAL bayonet caps. Drop a cap on either end, push, twist 35°, locked.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A simple cylindrical container with a clever lock: two identical bayonet caps that seat on either end of the open-both-ends tube. Drop the cap on, push, twist ~35°, locked.
No metal hardware. No supports. Print one tube and two caps.
Default dimensions: Ø50 × 60 mm (tube), 2 mm wall. Everything is parameterised at the top of tube.scad — edit tube_od and tube_h to resize. The bayonet slot / pin geometry scales automatically with the tube OD.
How the lock works. Each end of the tube has 2 L-shaped slots (vertical entry + horizontal lock arc, 180° apart). Each cap has 2 inward wedge-shaped pins. The two ends use opposite arc directions so a single hand motion — always twist CCW from your viewing side — locks both ends the same way.
Printing. Tube stands on either end, no brim needed. Cap prints TOP-DOWN (top disc on the bed, skirt rising up); the pins are ramped so their print-bottom face is a 37° slope, supportless.
