Counting matching models…
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
2.4 : 1 Scale Study Model of a Cylinder Lock I made this illustrative model of a keyed lock to help you understand the function of the door opening and closing mechanism. Video assembly instructions: I've always been fascinated by…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
A cylinder
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
20160601 cylinder center finder
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Cylinder Mazes by 3DFabXYZ.com With 3 different Christmas themed Lids. Are you looking for an unusual gift idea? Or a unique toy for someone special? Do you like solving puzzles? For a truly multi-functional object, 3DFabXYZ is proud to…
Print approx. €8.08–€9.88 excl. taxPreliminary estimate for one variant
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for PETGSource material: PET
Učebná pomôcka. Pre úsporu materiálu je 5% výplň.
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
A simple cylinder bOx!
Print approx. €12.21–€14.92 excl. taxPreliminary estimate for one variant
Adapt any cylinder to any strap on your backpack with this parametric design. Suggestions welcome! If you want me to include a custom size in the files, just let me know in the comments and I'll add it. What items do you want to attach to…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
This lock has a spring loaded wafer that locks the cylinder core in position until the key is inserted. The tailpiece slips onto the inside end of the core and can be held in place with a screw. The pilot hole is designed for a #8-32…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for one variant
Created this vase to display LEGO Flowers.
Print approx. €10.34–€12.64 excl. taxPreliminary estimate for one variant
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
For geocaching, the original textured screw cap container works great, provided you either hide it well or add a loop for hanging it up. But it is a bit small. So to add a little more room for note paper and a less stubby pencil, this…
Print approx. €4.70–€5.75 excl. taxPreliminary estimate for one variant
It's a fully functional cylinder lock that offers 5⁴ (=625) different combinations. You will need 4 springs from a ball pen (diameter = 4 mm, Length > 19 mm, tolerance is quite high and parametric) or let gravity do the its job for a…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for PETGSource material: PET
This is a keyway cover for European-style Cylinder Locks. The majority of these locks do not require a cover at all. However, in my home some of them allow a noticeable draft. In a world of high heating costs, I created these simple…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant
Dieses Modell ist ein Wandhalter für eine Gasflaschenkappe, wie sie bei den klassischen 5 kg und 11 kg Gasflaschen (Camping, Gasgrill, …) verwendet wird. Ich habe ein Modell mit und Eines ohne Schraublöcher hochgeladen, dann ist man bei…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page. For more of my designs check out my website: https://3domcontact.wixsite.com/3dom Simple design of a…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
Pictures are of V1 STL files. I've printed but still need to solder the V2 STLs based lamp. V2 lamp uses 5-12 LED strips placed horizontally on the lamp - significantly reduces the amount of soldering! As well, the button has been moved…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
A cylinder dummy that was mandatory for a door in a fire escape section had the price of 10€, this part is a lot cheaper. In Germany, the fire brigade wants to see this in locks of doors that must not be locked because they are on an…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Colt may claim that their Peacemaker is how the west was one, but that's a bit of a stretch. The truth is that repeatable firing weapons like the revolver were the real MVP. Before them we had black powder rifles and pistols the fired…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
As I am switching to sidemount diving (from twin backmounted doubles), I now have the old problem of cylinders sliding around in the trunk of the car. I want to protect the cylinders, and my car, and I wanted something that would…
Print approx. €22.97–€28.07 excl. taxPreliminary estimate for PETGSource material: PET
This small parts cylinder is designed with the dimensions specified in the Canada Toys Regulations, Schedule 1 (SOR/2011-17), a regulation adopted under the Canada Consumer Product Safety Act (S.C. 2010, c. 21). A toy that is likely to be…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
I have an office chair that is very comfortable, but has a pneumatic cylinder that wants to lower the chair when I don't want it to. Since I usually use the chair in the top position anyway, I figured that I would create a brace that…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter to enable an owner of a 2017 BRZ/FRS/86 sports car to be able to pressure bleed their brake system from the master cylinder. There are several pressure bleeder bottle kits available, or just use an air compressor with…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Lock cover fitting standard euro cylinder door locks that have an additional 3mm or more space around the lock cylinder. Demo model (on the photos) was printed in PLA, the cover shouldn't require more sturdiness, the downloadable files…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Created this for my AEROGARDEN Harvest as I wanted to use standard rockwool plugs. Consistent diameter with the bottom rounded so it doesn't catch on the water spout. I print these upside down with small support in the middle so that the…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
I've requested an Abus adaptor to Nuki but my new cylinder doesn't have the shape of that adaptor but an 9.9mm cylinder instead so I had to create this adaptor for it.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Key-in-Knob and Interchangeable Core locks can be difficult to hold and position for locksport picking due to their shape. Even small vises, such as a Pana-Vise tend to bind them up, making them impossible to pick. These prints are…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
A magnet this size is dangerous, so this is a little holder which will help keep it from shattering. You can use it as is to really hold that xmas card on your fridge, or attach it to something permanently with a 3d pen. Super glue or use…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
A blind cover for euro profile cylinder door handle face plates. I made this model for Hoppe short backplate Birmingham 1117/202KP/AP (11794926) handle sets for profile doors, so you might have to alter it a bit to make it work if your…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
This 3D-printed spacer is designed for Steyr air pistol cylinders, providing a secure and stable fit. It helps maintain proper alignment and spacing, ensuring consistent performance for both training and competition. The spacer is…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This tool is necessary when changing the type of lock with one that does not have the same key axis; the operation is more difficult to explain than to do. Anyway: from the external side, drill with the hole saw using the hole in the…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
If you have the Nuki cylinder lock and the Nuki door opener, the pin on the cylinder is too narrow and turns in the slot. The print was made with Sovol SV07 Plus and Amazon PLA. GCode file was created with the Cura derivative of Sovol…
Print approx. €9.08–€11.10 excl. taxPreliminary estimate for one variant
This print holds a 400 g propane or MAPP gas cylinder upright while in use. The cylinders are about 75 mm diameter. It has 3 screw holes in the base so that it can be attached to a piece of wood or bench to improve stability.
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for PETGSource material: PET
So this is just a remix of ababemilo's excellent Cylinder Center Finder . However, my minor twist was putting a name on it. “Why” you ask? Well, so my family members don't throw it out in the trash not knowing what it is. If you're…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
BOM: Printed with ROSA3D High Speed PLA Signal Violet This candle holder is all about the atmosphere. The design consists of tall, vertical ribs that encircle the flame, creating a cozy "cage" effect. Why print this? Light Play: When the…
Print approx. €3.79–€4.64 excl. taxPreliminary estimate for one variant
This is spare butterfly nut for all Gardena 380 Cylinder Lawnmower models. Original part is made of POM (Polyoxymethylene), but I made mine of PETG (threaded) and ABS (nut insert). Print instructions Category: Outdoor & Garden Summary…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
My first remix, a remix of https://www.printables.com/model/318740-cyberpunk-edgerunners-lithophane-cylinder. Added a top cover ( I glued tinfoil to the inside which amplifies the effect) Tolerances are very high (it's going to be…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
This is an experimental device. Use with caution on your own risk. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 15 hours. Slicer settings: 0.3mm layer height, 4 perimeters, 30% infill (or…
Print approx. €8.17–€9.98 excl. taxPreliminary estimate for PETGSource material: PET
I decided to make some miniprints models for fun.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
The GripLok Cylinder Housing is a versatile 3D-printed tool designed for lockpickers working with key-in-knob cylinders or any deadbolt cylinders that will fit. It features two interlocking parts that screw together to securely sandwich…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Small print part for a missing piece
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Lopatka není součástí originálního modelu/Litlle shovel is not included in this original model. Parametry: 50mm x 51mm (ŠxV) vnitřní rozměry = 100ml objem Tloušťka stěny: 2,25mm Parameters: 50mmx51mm inside parameters = 100ml volume…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
When I switch out my cylinder I want to keep it the ribber dial and the setup bonnet together. The Lid screws on. Because it is a a 7,5mm plastic rod it is not designed for strong forces but it is stronge enough for my usage. It is…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
After sawing some aluminium rods and pipes to length I always end up with a bad cut and rough edges. The inside edges of pipes are easily cleaned up with a deburring tool but the outside edge is more tricky (if you don't have a belt or…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
This is an experimental device. Use with caution on your own risk Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 4 hours. Slicer settings: 0.2mm layer height, 4 perimeters, no supports Post…
Print approx. €6.40–€7.82 excl. taxPreliminary estimate for PETGSource material: PET
🛠 Key Hole Cover for Interior Doors Ever wondered why some bedroom or interior doors come with both knobs and key locks? For most households, keys on bedroom doors don’t make much sense — they’re just extra hardware that gets in the way.…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Those are tiny clips to be printed with different text and/or color to apply do (power) cables to more easily identify them. The specific examples in the STL file are just examples. You may want to create versions with your customized…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
My friend and I designed this after I painted my Macan calipers red to go on my mk7 GTI and had to basically avoid the area around the cylinders for fear of getting paint into them. They're designed around the width of electrical tape;…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
After the original plastic part failed (see photo of the gray ring), I needed a replacement. This part isn't an exact match, but does the job. Steps: Print part, using supports as required and 100% infill. I used PETG. Use soldering iron…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This model fixed my sinking office chair for good. Simply remove the clip on the very bottom of the chair holding the piston in place. The shaft/piston is easily removed from the chair legs/base. Slide the printed part on the shaft. Put…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
This is a storage box for the Thoth Montessori Knobbed Cylinder Socket set as sold here:…
Print approx. €12.82–€15.67 excl. taxPreliminary estimate for one variant
It just a simple knurled cylinder. I tried knurling with Fusion 360 for the first time on a simple object. Worked quite well. So have fun with it... Printed on a Prusa Mini with Galaxy Black PETG. Added a D90 variant
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for PETGSource material: PET
VidaXL awning cylinder holder 450cm The awning cylinder was sagging, rubbing against the mounting screw. The manufacturer does not sell the holder separately.
Print approx. €7.13–€8.71 excl. taxPreliminary estimate for PETGSource material: PET
These two Tentacle System models work the same but have different purposes. They both use 4mm hardware. There is an pegboard hanger that provides a base. It works with any size of pegboard hooks. It can be attached to many different…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
A small cap that fits snug around the Bold Smart Lock/Cylinder on the inside if you don't want to disable the button within the app but want to prevent the kids (that barely can reach the lock) to activate it. If you don't have a Bold…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
This is an experimental device. Use with caution on your own risk. The design has been made for the humidifier bottle with the diameter of 48mm. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 2.5…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for PETGSource material: PET
This just a simple model so you can really use it for anything including a pencil holder a office organizer you could also use this for a 3D printer poop holder really anything you can think of if the lid keeps ripping I would suggest…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
(EN version follows) Ve škole máme sady tělísek o stejném objemu a o stejné hmotnosti od 3B Scientific, které používáme při výuce Archimedova zákona. Válečky o průměru 20 mm vyrobené z různých materiálů jsou v sadách o stejném objemu a…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a holder for the clear plastic Beretta choke tube cylinders. I have these with my Optima-Choke HP choke tubes. We use it in the safe to organize the choke tubes. It isn't suitable to take to the range; we use a choke tube case for…
Print approx. €13.57–€16.59 excl. taxPreliminary estimate for one variant
A three-part set for hand-building small espresso cups from rolled clay. How it works: Roll a sheet of clay to approximately 7 mm thickness. Use the strip cutter to cut the rectangular strip that forms the side of the cup. Use the base…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
I designed and printed the concentric hexagonal cylinders (based on Vladimir Murano's video on his Desktop Makes channel) and then tried printing gears to rotate the cylinders in vase mode. I thought I would have to make a smaller…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
The steering cylinder on a Garmin TR1 autopilot needs to be cushioned with little plastic bushings so as to prevent metal on metal and the associated corrosion that comes with that. The original bushings are hard to get. Use the slicer…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Cylinder r = 100 mm h= 100 mm Can be used as skirt with 0% infill, 0% top and bottom layers and 1 perimeter.
Fidget Fun That Never Runs Out of Spring! 3D Printed Slinky Spring Fidget Cylinder. Mesmerizing Coiling and Recoiling Action. Unique Custom Printed Design. Keep Those Hands And Minds Engaged! Please use 0.2mm layer height for the print,…
This Remix of the Twist Lock Present introduces a new hat box inspired cylinder shape. https://youtu.be/KVtVwutMq5E Sizes All boxes are have an internal diameter of 100mm. Short - 30mm tall Medium - 50mm tall Tall - 70mm tall Extra Tall -…
A simple test cylinder, good print to show how consistent or not your Z-axis is. the Base is 2mm thick so you can measure if your z-offset is correct. The cylinder is 100mm so you can measure for your Z-axis e-steps. Base is 40mm x 40mm…
Remix of Motor Fidget by Mars3D with more cylinders. The higher cylinder counts may require more play to get free and some lubrication.
[First, let me offer you something fantastic] I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends. Right now is the best time to get all my programs. Get the entire…
Perfect Circle (round cylinder) How I Designed This Originally using Tinkercad following the instructions from this youtube video: https://www.youtube.com/watch?v=e7anvs9PZUI Later with Fusion 360
Like quite some other models these days, this model is inspired by “Fallout”. I wanted to make a storage container with that heavy/armored/SciFi vibe, this time with a firmly locking bayonet lock. It's bit spring loaded ('compliant' in…
Print with 0.2mm layers.
Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…
General The radial engine is a reciprocating type internal combustion engine configuration in which the cylinders "radiate" outward from a central crankcase like the spokes of a wheel. It resembles a stylized star when viewed from the…
Gas Cylinder Stash Keychain Little gas cylinder with seamless threaded lid. It won't look like there's any secrets in it. Universal slicer settings: Material: PLA Nozzle: 0.4mm Layer Height: 0.20mm No Supports
A spiraled cylinder plant pot with a twisted texture. Perfect for indoor plants like cacti and succulents. The planter can be printed in vase mode and in normal mode. I've included a shelled version for printing with multiple perimeters.…
Need a basic cube but don't feel like installing 3D software or firing it up to make one? Here you go. This is a small pack of 6 primitive shapes for whatever you may need them for. Whether it be test cubes, or stretching the cylinder…
A simple hollow cylinder model designed for general use. Ideal for testing printer calibration, creating spacers, sleeve
Designed to allow quick and easy storage solutions for use with the Multiboard system with the following design objectives: Parametric Box or cylindrincal Honeycomb pattern to match multiboard asthetic Use two peg board holes for…
This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…
4 Cylinder Engine Assembly & Drafting This model is designed as a practice project to enhance your 3D CAD skills. It's a detailed 4-cylinder engine assembly that tests your abilities in both modeling and drafting. The tolerances are not…
To build this - you will need one of each of these parts that are included (Choose one of the cylinders that is included) - along with a Bic Pencil spring (the ones that are hexagonal and look like this:) , and a toy screw or 4-40 x 3/8in…
Printing The cylinder head is very detailed and could cause problems on some printers. In that case please use the “simplified” version of the cylinder head. The Cylinder Head is printed with support. Beware of seams on axles and…
This model is compatible with the lego system.
Attention : This print requires a very accurate printer, the tolerances are small ! You could scale it up, be then the springs should also be scaled up Instructions Required : Printed pieces : 1 x Cylinder 1 x Core → only piece that needs…
This calibration object helps to assess the correctness of the motor calibrations. The external diameter of this object is 30 mm, and its height is 50 mm. Furthermore, the printed cylinder shall be perfectly round.
This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…
3 Cylinder Engine Block With Movable Pistons Easy Assembly: Snap-fit design requires no additional hardware.
This Remix of the Twist Lock Present introduces a new hat box inspired cylinder shape. https://youtu.be/KVtVwutMq5E Sizes All boxes are have an internal diameter of 140mm. Short - 30mm tall Medium - 50mm tall Tall - 70mm tall Extra Tall -…
Updates: 2026-10-07 Updated V2 for much easier priming. 2026-09-24 Added 3 V2 variants that print without support. 2026-07-05 Added a version with looser barrel fit. 2026-07-03 Added a version with looser clip; print this if you think the…
This is my Ambiguous Cylinder Generator to create Illusions based on the "Ambiguous Cylinder illusion" by Kokichi Sugihara. Use OpenSCAD to customize to your liking! Have fun and share a make if you print one! Changelog: v1.4: Presets for…
I couldn't find this online, so I made my own. It is a honeycomb-patterned cylinder for printing in vase mode - as a lamp shade. The fusion 360 file is parameterized, so you can easily change the size of the comb or of the vase with just…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Single-layer walls allow max light through. No supports needed. Easy to print. Fits any LED strip lighting. I developed this to hold most of a 5m strip of LEDs, cut off or tuck…
Hello together, Who doesn't know the struggle with CO2 cylinders lying somewhere around in a cabinet taking up a lot of space? Therefore i designed a small bracket to screw into the cabinet. Depends on the bracket you need, it can hold…
A radial engine is an internal combustion engine configuration in which the cylinders radiate outward from a central housing like the spokes of a wheel. It resembles a stylized star when viewed from the front, and is called a "star…
This cylindrical trick box has a hidden latch mechanism. This remix of the original Twist Lock Trick Box (hexagon) uses a round base and cap. Just like the original, this can be customized with different topper designs. Any topper created…
