Hydraulic Cylinder mounting bushings - Garmin TR1 Autopilot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These little bushings cushion the action of the steering cylinder on a Garmin TR1 Autopilot
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 8
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
The steering cylinder on a Garmin TR1 autopilot needs to be cushioned with little plastic bushings so as to prevent metal on metal and the associated corrosion that comes with that. The original bushings are hard to get.
Use the slicer file provided with Prusa Slicer and you will get four bushings in vase mode in one print. They are perfect sized and match the originals in every way except that these will be FDM printed.
If you choose to slice this yourself, you will need to be careful to get a cut-out in the center of the bushing body so that it can ride on the shaft that it cushions from the cylinder ends. There is a small disk shaped modifier included in the model which must be turned into a negative volume for slicing.
Enjoy