1 / 3
Hydraulic Cylinder mounting bushings - Garmin TR1 Autopilot — zdjęcie 1
1 / 3

Hydraulic Cylinder mounting bushings - Garmin TR1 Autopilot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,07 € – 0,09 € netto (bez VAT)

Dla pliku: tr1 cylinder bushing 4x_0.4n_0.2mm_PETG_MK4S_5m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,08 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
4,8 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

These little bushings cushion the action of the steering cylinder on a Garmin TR1 Autopilot

Ocena
0 / 5
Polubienia
4
Pobrania
8
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The steering cylinder on a Garmin TR1 autopilot needs to be cushioned with little plastic bushings so as to prevent metal on metal and the associated corrosion that comes with that.  The original bushings are hard to get.

Use the slicer file provided with Prusa Slicer and you will get four bushings in vase mode in one print.  They are perfect sized and match the originals in every way except that these will be FDM printed.

If you choose to slice this yourself, you will need to be careful to get a cut-out in the center of the bushing body so that it can ride on the shaft that it cushions from the cylinder ends.  There is a small disk shaped modifier included in the model which must be turned into a negative volume for slicing.  

Enjoy

Tagi